Shark NV300NZ Vacuum Cleaner Manual

The Shark NV300NZ is a versatile upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a detachable canister for portable cleaning. It includes multiple attachments for above-floor cleaning, a large dust cup capacity, and a multi-surface brush roll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal filtration, LED headlights, detachable pod, crevice tool, dusting brush, upholstery tool, and pet multi-tool.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Detachable Pod	Converts to a portable canister for above-floor cleaning
Large Dust Cup	0.9-quart capacity, easy-empty design
Brush Roll Shutoff	Allows gentle cleaning on delicate rugs
Multi-Surface Brush Roll	Self-cleaning to prevent hair wrap
Power Switch	Turns vacuum on/off
Height Adjustment	Adjusts for different carpet pile heights
Attachments Storage	Integrated caddy for tools on vacuum body

Assembly & Setup

Unpack and inspect all components. Assemble following steps.

Attach handle: Insert handle into body until it clicks securely.
Install floor nozzle: Connect wand to floor nozzle, ensuring it locks.
Attach hose: Connect hose to pod and secure clips.
Store attachments: Place tools in onboard caddy.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers clear of moving parts.

First-Time Use

Before first use, charge if cordless; for corded, plug in and test.

Check filters: Ensure both pre-motor and post-motor filters are installed.
Empty dust cup: Ensure it is empty and properly seated.
Select surface setting: Use brush roll shutoff for hard floors; adjust height for carpets.
Power on: Press power switch; LED lights should illuminate.
Test attachments: Detach pod and try crevice tool and dusting brush.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

Model: Shark NV300NZ.
Type: Upright vacuum with detachable pod.
Technology: DuoClean, Anti-Allergen Complete Seal.
Dust Cup Capacity: 0.9 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Filtration: HEPA filter, washable foam and felt filters.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, hose release button, wand release pedal.

Floor Nozzle: Brush roll shutoff switch, height adjustment lever (for carpets).

Pod: Detach button, hose connection, accessory port.

Settings: Brush roll on/off (for hard floors vs carpets), height adjustment (low/medium/high pile), suction control (via accessory selection).

Using Attachments

Detach pod for above-floor cleaning.

Press detach button on pod to release from upright body.
Select tool: Insert into hose end until it clicks.
Crevice tool: For tight spaces, corners, between cushions.
Dusting brush: For delicate surfaces, blinds, shelves.
Upholstery tool: For sofas, chairs, stairs.
Pet multi-tool: Combines bristles and upholstery tool for pet hair.
Reattach pod: Align with body and push until it locks.

Tip: Store attachments on caddy when not in use.

Cleaning Modes

Supports multiple cleaning configurations.

Upright mode: For floor cleaning with floor nozzle attached.
Above-floor mode: Detach pod, use hose and tools for furniture, ceilings, cars.
Hard floor setting: Engage brush roll shutoff to prevent scattering debris.
Carpet setting: Adjust height for optimal suction and brush roll action.
Under-furniture cleaning: LED lights help see under low-clearance furniture.

WARNING! Do not use attachments to pick up sharp objects that could damage hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, empty when full or after each use.
Clean filters: Rinse pre-motor foam filter and post-motor HEPA filter every 3 months (air dry 24 hours).
Check brush roll: Remove debris and hair wrap regularly; lift lever to access.
Inspect hose: Clear clogs using long object; avoid sharp bends.
Store properly: Wrap cord around cord hooks, store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brush roll not spinning	Hair/debris wrap	Turn off, unplug, clean brush roll; ensure shutoff switch is on.
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Detachable pod not locking	Misalignment/debris	Realign pod with body; clear any obstructions in connection area.
Unusual noise	Obstruction in airway	Turn off, unplug, inspect hose, nozzle, and brush roll for foreign objects.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; sharkclean.com