Shark NV22T Vacuum Cleaner Manual

The Shark NV22T is a versatile upright vacuum cleaner featuring DuoClean technology, Lift-Away functionality, LED headlights, an anti-allergen complete seal, and a HEPA filter. It includes multiple attachments for above-floor cleaning, a large dust cup capacity, and various cleaning modes for carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean brush roll, Lift-Away pod, hose and wand assembly, crevice tool, dusting brush, upholstery tool, and pet multi-tool.

Assembly & Setup

Unpack and inspect contents. Assemble according to instructions.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Connect hose: Attach hose to wand and vacuum pod.
3. Install attachments: Store tools on attachment holder.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; select appropriate settings.

1. Select floor type: Use brush roll control for carpets; deactivate for hard floors.
2. Adjust suction: Use suction control for delicate rugs or high-pile carpets.
3. Use Lift-Away: Detach pod for stairs, furniture, or above-floor cleaning.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

• Model: Shark NV22T.
• Technology: DuoClean with dual brush rolls.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 quarts.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls on vacuum body. Power Switch: Turns vacuum on/off. Brush Roll Control: Activates/deactivates brush roll. Suction Control: Adjusts suction power.

LED Indicators: Power on, brush roll active, filter check. Lift-Away Release: Button to detach pod. Dust Cup Release: Button to empty dust cup.

Settings: Carpet mode (brush roll on), Hard floor mode (brush roll off), Max suction (for deep cleaning).

Using Attachments

Attach tools to hose or wand for specialized cleaning.

1. Detach pod: Use Lift-Away for portable cleaning.
2. Select tool: Attach crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture, pet multi-tool for pet hair.
3. Connect: Insert tool into hose end until secure.
4. Clean: Use appropriate suction setting.

Tip: Store attachments on holder when not in use.

Cleaning Modes

Supports multiple cleaning modes for different surfaces.

1. Carpet mode: Brush roll on for deep cleaning.
2. Hard floor mode: Brush roll off to prevent scattering debris.
3. Above-floor mode: Use Lift-Away with attachments.
4. Max suction: For embedded dirt or high-pile carpets.
5. LED lights: Automatically illuminate in low light.

WARNING! Do not run vacuum over cord or hose; avoid vacuuming sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filters: Rinse HEPA filter every 3 months; air dry completely.
3. Check brush roll: Remove hair or debris wrapped around brush roll.
4. Inspect hose and attachments: Clear clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; www.sharkclean.com