Shark NV22LWM Vacuum Cleaner Manual

The Shark NV22LWM is a versatile upright vacuum cleaner featuring Lift-Away technology, DuoClean PowerFins brushroll, Anti-Allergen Complete Seal Technology, LED headlights, and a multi-surface cleaning system. It includes a variety of attachments for above-floor cleaning and is designed for use on carpets, hard floors, and upholstery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with dust cup, Lift-Away pod, DuoClean PowerFins brushroll, wand, hose, and accessory storage.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
DuoClean PowerFins Brushroll	Combines bristle brush and soft roller for multi-surface cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Multi-Surface Settings	Adjustable suction for carpets and hard floors
Large Dust Cup	Easy-empty, bagless design
Accessory Storage	Built-in caddy for crevice tool, upholstery tool, and dusting brush
POWER Button	Turns vacuum on/off
Brushroll On/Off	Switch to disable brushroll for hard floors
Wand Release	Button to detach wand for above-floor cleaning

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach wand: Insert wand into upright body until it clicks into place.
Connect hose: Attach hose to wand and pod connection points.
Install accessories: Store crevice tool, upholstery tool, and dusting brush in caddy.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate settings for your floor type.

Select floor setting: Use dial on vacuum head for carpets or hard floors.
Turn on: Press POWER button; LED lights will illuminate.
Adjust suction: Use settings dial for optimal cleaning power.
Empty dust cup: After use, press release button to remove and empty cup.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model: Shark NV22LWM.
Technology: Lift-Away, DuoClean PowerFins, Anti-Allergen Complete Seal.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 quarts.
Attachments: Crevice tool, upholstery tool, dusting brush.

Filtration:Washable foam and felt filters Brushroll On/Off SwitchDisables brushroll for hard floor cleaning Suction Control DialAdjusts power for different surfaces Wand Release ButtonDetaches wand for above-floor cleaning Dust Cup ReleaseButton to remove and empty dust cup

Using Attachments

Detach wand and connect tools for above-floor cleaning.

Turn off vacuum and unplug before changing attachments.

Remove wand: Press wand release button and pull wand out.

Select tool: Attach crevice tool, upholstery tool, or dusting brush to wand end.

Reconnect hose: Ensure hose is securely attached to wand and pod.

Turn on vacuum and begin cleaning.

Tip: Use crevice tool for tight spaces; upholstery tool for furniture; dusting brush for shelves.

Lift-Away Mode

Detach pod for portable cleaning above floors.

Press Lift-Away release button on vacuum body.

Lift pod away from floor nozzle; carry by handle.

Use wand and attachments for stairs, curtains, or ceilings.

Return pod to upright body by aligning and pressing down until it clicks.

WARNING! Ensure hose is not twisted or pinched during Lift-Away use. Do not pull by hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use; wash with water monthly (air dry completely).

Clean brushroll: Remove debris and hair regularly; check for obstructions.

Wash filters: Remove foam and felt filters; rinse under water every 3 months (air dry 24 hours).

Inspect hose and wand for blockages; clear if necessary.

CAUTION! Unplug vacuum before maintenance. Do not use vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Power cord/outlet Check plug connection; try different outlet; ensure POWER button is pressed.

Loss of suction Full dust cup/clog Empty dust cup; check hose, wand, and brushroll for blockages.

Brushroll not spinning Debris/switch Clear hair and debris from brushroll; ensure Brushroll On/Off switch is set to ON.

Vacuum overheating Clogged filters Clean or replace filters; allow vacuum to cool for 60 minutes.

Unusual noise Foreign object Turn off and unplug; inspect hose, wand, and brushroll for obstructions.

Reset: Unplug vacuum for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com

Shark NV22LWM Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure POWER button is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and brushroll for blockages.
Brushroll not spinning	Debris/switch	Clear hair and debris from brushroll; ensure Brushroll On/Off switch is set to ON.
Vacuum overheating	Clogged filters	Clean or replace filters; allow vacuum to cool for 60 minutes.
Unusual noise	Foreign object	Turn off and unplug; inspect hose, wand, and brushroll for obstructions.