Shark NV22LCO Vacuum Cleaner Manual

The Shark NV22LCO is a versatile upright vacuum cleaner featuring Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and a large-capacity dust cup. It is designed for deep cleaning carpets and hard floors while capturing allergens and dust. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright body with Lift-Away pod, DuoClean floor nozzle, Anti-Allergen Complete Seal filtration, LED headlights, dust cup with empty button, hose, wand, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
DuoClean Floor Nozzle	Dual brush rolls for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dust cup with one-touch release
Power Switch	Turns vacuum on/off
Brush Roll Control	Enables/disables brush roll for hard floors
Hose & Wand	Extendable for above-floor cleaning
Accessory Storage	Crevice tool, dusting brush, and upholstery tool included
Cord Wrap	Integrated cord wrap for easy storage

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach wand: Insert wand into upright body until it clicks.
Attach hose: Connect hose to wand and pod.
Install floor nozzle: Slide nozzle into base until it locks.
Store accessories: Attach tools to onboard clips.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before cleaning, perform initial setup.

Check filters: Ensure pre-motor and post-motor filters are installed.
Adjust height setting: Use dial on floor nozzle for carpet or hard floor.
Turn on: Press power switch; LED lights will illuminate.
Test suction: Verify strong suction on floor surface.
Empty dust cup: Press empty button to release debris after use.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark NV22LCO.
Technology: Lift-Away with DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brush roll on/off button.

Body: Lift-Away release button, dust cup empty button, height adjustment dial, accessory storage clips.

Settings: Height adjustment (carpet/low pile, carpet/high pile, hard floor), brush roll on/off for delicate rugs, suction power (single speed).

Using Attachments

For above-floor cleaning, use hose and wand with tools.

Detach wand: Press release button on upright body.
Attach tool: Connect crevice tool, dusting brush, or upholstery tool to wand.
Clean: Use for furniture, stairs, ceilings, and tight spaces.
Return: Store tools on onboard clips when not in use.

Tip: Ensure vacuum is on and brush roll is off when using attachments on delicate surfaces.

Lift-Away Mode

Portable cleaning for stairs, furniture, and above-floor areas.

Release pod: Press Lift-Away button on back of vacuum.
Lift pod: Detach from floor nozzle; carry by handle.
Connect hose: Use hose and wand with attachments.
Clean: Carry pod to clean stairs, shelves, or furniture.
Reattach: Place pod back onto floor nozzle until it clicks.

WARNING! Do not pull hose excessively; avoid sharp bends.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press empty button over trash can after each use.
Clean filters: Rinse pre-motor and post-motor filters monthly; air dry 24 hours.
Check brush roll: Remove debris wrapped around brush roll regularly.
Inspect hose: Clear blockages if suction decreases.
Store properly: Wrap cord, store in dry area.

CAUTION! Unplug before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for blockages; clean filters.
Brush roll not spinning	Debris/wrap	Turn off, unplug, and remove debris from brush roll; ensure brush roll is on.
Vacuum tipping over	Height setting	Adjust height dial to match floor type (carpet/hard floor).
Unusual noise	Obstruction	Turn off, unplug, and check for objects in hose, nozzle, or brush roll.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com