Shark NV22LC Vacuum Cleaner Manual

The Shark NV22LC is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple cleaning modes for carpets and hard floors. It includes a detachable pod for portable cleaning, various attachments, and a 25-foot power cord. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean PowerFins brushroll, detachable pod, dust cup, hose, wand, and various attachments.

Feature	Description
DuoClean PowerFins	Dual brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Easy-empty, no-touch dust cup
Detachable Pod	Converts to a portable vacuum for above-floor cleaning
Cleaning Modes	CARPET, HARD FLOOR, and OFF modes
Power Cord	25-foot cord with cord wrap
Attachments	Crevice tool, dusting brush, pet multi-tool, upholstery tool
Wand Release	Button to detach wand for extended reach
Power Switch	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach the wand: Insert wand into vacuum body until it clicks.
Connect the hose: Attach hose to wand and pod connection points.
Install attachments: Store on vacuum caddy or connect as needed.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use mode switch for CARPET or HARD FLOOR.
Adjust height: Vacuum auto-adjusts; ensure brushroll spins freely.
Empty dust cup: Check dust cup is empty before first use.
Test attachments: Connect pet multi-tool or crevice tool for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark NV22LC.
Technology: DuoClean PowerFins with Anti-Allergen Complete Seal.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Cleaning Modes: CARPET, HARD FLOOR, OFF.
Attachments Included: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on vacuum body. Mode Switch: CARPET, HARD FLOOR, OFF. Power Switch: On/Off button. Wand Release: Button to detach wand. Dust Cup Release: Lever to remove dust cup.

Pod Features: On/Off button, hose connection, attachment storage.

Cleaning Modes: CARPET for deep cleaning; HARD FLOOR for bare floors; OFF to disable brushroll. Height Adjustment: Automatic based on floor type. LED Lights: Automatically illuminate in low light.

Using Attachments

For above-floor cleaning: detach pod or use hose/wand.

Turn off vacuum before changing attachments.
Detach pod: Press release button to separate pod from vacuum body.
Connect tool: Insert desired attachment into hose end.
Select mode: Use pod's On/Off button for suction control.

Tip: Use crevice tool for tight spaces; pet multi-tool for pet hair; dusting brush for shelves.

Cleaning Modes

Optimize cleaning for different surfaces.

CARPET Mode: Activates brushroll for deep carpet cleaning.
HARD FLOOR Mode: Gentle brushroll action for hard surfaces.
OFF Mode: Disables brushroll; use for delicate rugs or suction-only cleaning.
Pod Mode: Use detachable pod with attachments for stairs, furniture, and cars.

WARNING! Do not use CARPET mode on hard floors without switching; may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release lever; empty when full or after each use.
Clean filters: Rinse foam and felt filters monthly; air dry completely before reinserting.
Clear brushroll: Remove debris from brushroll regularly.
Check for clogs: Inspect hose, wand, and nozzle if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not use wet filters; allow 24 hours to dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug is secure; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris/mode setting	Clear brushroll of hair and fibers; ensure mode is set to CARPET or HARD FLOOR.
Vacuum overheating	Clog/filter	Turn off and unplug; check for clogs; clean filters; allow to cool for 60 minutes.
Unusual noise	Foreign object	Turn off and unplug; inspect brushroll, hose, and dust cup for obstructions.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com