Shark NV181 Vacuum Cleaner Manual

The Shark NV181 is a versatile upright vacuum cleaner featuring Lift-Away technology, HEPA filtration, a motorized brushroll for carpets and hard floors, multiple suction settings, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motorized brushroll, Lift-Away pod, wand, hose, and accessory tools.

Assembly & Setup

Unpack all components and inspect for damage.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Connect hose: Attach hose to wand and vacuum pod connections.
3. Install attachments: Store accessories in built-in caddy.
4. Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Before first use, ensure all components are properly assembled.

1. Select surface setting: Choose appropriate suction level for floor type.
2. Test brushroll: Ensure brushroll spins freely on carpet.
3. Empty dust cup: Check that dust cup is empty before use.
4. Practice detachment: Familiarize yourself with Lift-Away mechanism.

CAUTION! Do not vacuum large debris or liquids. Keep vacuum away from heat sources.

Specifications

• Model: Shark NV181.
• Technology: Lift-Away with HEPA filtration.
• Suction Power: Adjustable multi-surface suction.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet power brush.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on vacuum body.

Power Switch: Turns motor on/off. Suction Control: Adjusts suction power (Low/Medium/High). Brushroll Switch: Enables/disables motorized brushroll. Lift-Away Release: Button to detach pod from vacuum body. Wand Release: Button to remove cleaning wand.

Settings: Choose suction level based on floor type (High for carpets, Low for hard floors). Use brushroll off for delicate area rugs or hard floors.

Using Attachments

Accessories for above-floor cleaning: crevice tool, dusting brush, upholstery tool, pet power brush.

1. Detach wand: Press wand release button.
2. Select attachment: Choose appropriate tool for cleaning task.
3. Connect to hose: Attach tool to end of hose.
4. Clean: Use tool on furniture, stairs, ceilings, or tight spaces.

Tip: Store attachments in built-in caddy when not in use.

Lift-Away Mode

Detachable pod for portable cleaning.

1. Press release: Press Lift-Away button on vacuum body.
2. Lift pod: Separate pod from vacuum base.
3. Clean above floor: Use pod with hose and attachments for stairs, furniture, etc.
4. Reattach: Align pod with base and push until it clicks.

WARNING! Ensure pod is securely attached before using as upright vacuum.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button and empty when full.
2. Clean filters: Remove and rinse HEPA filter monthly (air dry completely).
3. Clear brushroll: Remove hair and debris from brushroll regularly.
4. Check for blockages: Inspect hose, wand, and attachments for clogs.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com