Shark NV100UKL Vacuum Cleaner Manual

The Shark NV100UKL is a powerful upright vacuum cleaner featuring Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and a versatile cleaning wand. It is designed for deep cleaning carpets, hard floors, and above-floor areas. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Maintenance & Care 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body, DuoClean floor nozzle, Lift-Away pod, cleaning wand, hose, and various attachments.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable above-floor cleaning
DuoClean Floor NozzleDual brush rolls for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Power SwitchTurns vacuum on/off
Brush Roll ControlEnables/disables brush roll for hard floors
Floor Selector SwitchAdjusts suction for carpet or hard floor
Dust Cup ReleaseButton to empty dust cup
Wand Release PedalReleases cleaning wand for above-floor use
Hose Access PortConnects hose for handheld cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach handle: Insert handle into main body until it clicks into place.
  2. Install wand: Insert wand into back of vacuum until secure.
  3. Attach hose: Connect hose to access port on front of vacuum.
  4. Attach floor nozzle: Align nozzle with base and press until it clicks.
  5. Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure all parts are properly assembled.

  1. Select floor setting: Use floor selector switch for carpet or hard floor.
  2. Turn on: Press power switch; LED lights will illuminate.
  3. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
  4. Use Lift-Away: Press release button to detach pod for stairs or furniture.
  5. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brush roll on/off, floor selector (carpet/hard floor).

Body: Lift-Away release button, dust cup release, wand release pedal, hose access port.

Settings: Carpet mode (higher suction), hard floor mode (lower suction with brush roll off), above-floor mode (detached pod with attachments).

Cleaning Modes

Upright mode: For carpets and large floor areas. Lift-Away mode: Detach pod for stairs, furniture, and tight spaces. Handheld mode: Use hose with attachments for detailed cleaning.

  1. Ensure correct floor setting is selected.
  2. For above-floor cleaning, detach pod and attach desired tool.
  3. Use wand for high reach areas like ceilings and curtains.

Tip: Regularly check brush roll for tangled hair or debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filters monthly: Rinse foam and felt filters; replace HEPA filter every 6-12 months.
  3. Clear brush roll: Remove debris from brush roll regularly.
  4. Check hose for clogs if suction decreases.
  5. Store in dry area; wrap cord around cord hooks.

WARNING! Unplug vacuum before performing any maintenance.

Accessories

Included accessories: Crevice tool, dusting brush, upholstery tool, pet multi-tool, wand clip.

Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture; pet multi-tool for pet hair.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck power cord connection; try different outlet.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose, nozzle, and filters for clogs.
Brush roll not spinningDebris/tangleTurn off, unplug, and clear brush roll of debris.
Vacuum overheatingClogged filter/full dust cupClean filters; empty dust cup; let cool for 45 minutes.
Unusual noiseForeign object in brush roll/hoseTurn off, unplug, and inspect brush roll and hose.

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com

Shark NV100UKL Vacuum Cleaner Manual © - All Rights Reserved 2025