Shark NP320C 40 Vacuum Cleaner Manual

The Shark NP320C 40 is a versatile upright vacuum cleaner featuring a 40-foot power cord, Lift-Away technology for portable cleaning, DuoClean floor nozzle for carpets and hard floors, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a variety of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with Lift-Away pod, DuoClean floor nozzle, 40-foot power cord, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, and storage caddy.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
DuoClean Floor Nozzle	Dual brush rolls for carpets and hard floors
Anti-Allergen Complete Seal	HEPA filter traps 99.9% of dust and allergens
40-Foot Power Cord	Extended reach for large rooms
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, bagless design
Attachments Included	Crevice tool, dusting brush, upholstery tool
POWER/SURFACE Switch	Selects carpet or hard floor mode
SUCTION CONTROL	Adjusts suction power
RELEASE Buttons	For detaching pod and nozzle

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach handle: Insert handle into body until it clicks into place.
Install floor nozzle: Align nozzle with body and push until it locks.
Attach hose: Connect hose to pod and secure with twist lock.
Install filters: Place HEPA filter and pre-motor filter as indicated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

Select surface setting: Use POWER/SURFACE switch for carpet or hard floor.
Adjust suction: Turn SUCTION CONTROL dial as needed.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Use Lift-Away: Press RELEASE button to detach pod for above-floor cleaning.
Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush rolls.

Specifications

Model: Shark NP320C 40.
Cord Length: 40 feet.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Technology: Lift-Away, DuoClean brush rolls.
Attachments: Crevice tool, dusting brush, upholstery tool.
Dust Cup Capacity: 1.5 dry quarts.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: POWER/SURFACE switch, SUCTION CONTROL dial. Body: RELEASE buttons for pod and nozzle, dust cup release.

Indicator Lights: LED headlights activate automatically; filter check light alerts when filter needs cleaning.

Settings: Carpet mode (brush roll on), Hard floor mode (brush roll off), Suction control (Low/Medium/High). Maintenance: Empty dust cup, clean filters, check brush rolls for obstructions.

Using Attachments

Attach tools to hose for above-floor cleaning.

Detach pod: Press RELEASE button and lift pod away.
Connect tool: Insert crevice tool, dusting brush, or upholstery tool into hose end.
Select suction: Adjust SUCTION CONTROL for tool type.
Clean: Use tool on furniture, stairs, ceilings, or tight spaces.
Reattach pod: Align and click back into place.

Tip: Use lower suction for delicate fabrics.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty contents into trash.
Clean filters: Remove HEPA and pre-motor filters; rinse with cold water monthly.
Check brush rolls: Remove debris from DuoClean brush rolls.
Inspect hose: Clear any clogs with long object.
Wipe exterior: Use dry cloth to clean body and attachments.

WARNING! Unplug vacuum before maintenance. Allow filters to dry completely before reinstalling.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for blockages; clean filters.
Brush roll not spinning	Debris/obstruction	Turn off and unplug; remove debris from brush roll; check for tangled hair.
Vacuum overheating	Clogged filters	Clean filters; allow to cool; check for obstructions in air path.
Unusual noise	Foreign object	Turn off immediately; check for objects in hose, nozzle, or brush roll.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com