Shark NP320 40 Vacuum Cleaner Manual

The Shark NP320 40 is a powerful upright vacuum cleaner featuring a Lift-Away® pod for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, DuoClean® PowerFins® brushroll for carpets and hard floors, LED headlights, and a variety of attachments. It is designed for deep cleaning on multiple surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean® brushroll, Lift-Away® pod, Wand, Handle with controls, HEPA filter, Dust cup, and various attachments.

Feature	Description
Lift-Away® Pod	Detachable pod for portable cleaning above floors
DuoClean® PowerFins®	Dual brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap dust and allergens
LED Headlights	Illuminates debris under furniture and in dark areas
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Switch to engage or disengage brushroll for hard floors
Handle Controls	Buttons for power and brushroll settings
Dust Cup Release	Button to empty dust cup
Wand Release	Button to detach wand for above-floor cleaning
Attachments	Includes crevice tool, dusting brush, pet multi-tool

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach Handle: Insert handle into top of vacuum body until it clicks.
Attach Wand: Insert wand into socket on vacuum body; ensure secure.
Install Filters: Place pre-motor foam filter and post-motor HEPA filter into their compartments.
Attach Hose: Connect hose to port on vacuum body.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Check all connections are secure.

First-Time Use

Plug in vacuum; ensure area is clear of large debris.

Select Mode: Choose upright or Lift-Away® mode based on cleaning needs.
Adjust Settings: For hard floors, turn brushroll off using handle control.
Begin Cleaning: Press power button; move vacuum slowly over surface.
Empty Dust Cup: Press release button to empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark NP320 40.
Type: Upright vacuum with Lift-Away® technology.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Brushroll: DuoClean® PowerFins® for carpets and hard floors.
Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 quarts.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.

Controls and Settings

Power Switch: On/Off button on handle. Brushroll Control: Button to turn brushroll on/off for hard floors. Handle Release: Button to detach handle for Lift-Away® mode. Wand Release: Button to detach wand for above-floor cleaning.

LED Indicators: Lights indicate power status and brushroll engagement.

Upright Mode: For floor cleaning. Lift-Away® Mode: Detach pod for stairs, furniture, and above-floor cleaning. Brushroll Settings: On for carpets; Off for hard floors to prevent scattering debris.

Using Attachments

Attach tools to wand or hose for specialized cleaning.

Detach wand or hose from vacuum body.
Select attachment (e.g., crevice tool for tight spaces).
Insert attachment into end of wand or hose until it clicks.
Use attachment to clean desired area.

Tip: Ensure vacuum is powered off when changing attachments.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away® Mode: Portable cleaning for stairs, upholstery, ceilings.

Upright: Use as standard vacuum; engage brushroll for carpets.
Lift-Away: Press release button on pod; lift pod away from floor nozzle.
Attach hose and wand; select appropriate attachment.
Clean above-floor areas; return pod to floor nozzle to resume upright cleaning.

WARNING! Do not use Lift-Away® mode on wet surfaces or to pick up liquids.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button; empty into trash; reinstall.
Clean Filters: Remove and rinse foam filter monthly; replace HEPA filter every 12 months.
Check Brushroll: Remove debris wrapped around brushroll; ensure it spins freely.
Inspect Hose: Clear any blockages; ensure hose is not kinked.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinstalling.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug is secure; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris/switch	Remove debris from brushroll; ensure brushroll switch is on.
Vacuum overheating	Clog/filter	Check for blockages; clean or replace filters; allow to cool.
Unusual noise	Foreign object	Turn off and unplug; inspect brushroll and hose for obstructions.

Reset: Unplug vacuum for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com