Shark NP319C Vacuum Cleaner Manual

The Shark NP319C is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, and a lightweight, corded design. It is designed for deep carpet cleaning and hard floor pickup with a self-cleaning brushroll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal filtration, LED headlights, wand release, power switch, cord wrap, dust cup release.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into vacuum body until it clicks into place.
2. Install wand: Insert wand into handle and secure with locking mechanism.
3. Attach hose: Connect hose to wand and vacuum body ports.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first cleaning, perform initial setup.

1. Check filters: Ensure foam and felt filters are properly installed.
2. Clear area: Remove large debris or obstacles from floor.
3. Select mode: Set to upright mode for floor cleaning.
4. Adjust height: For carpets, ensure brushroll contacts carpet surface.
5. Power on: Press power switch and begin cleaning.

CAUTION! Do not vacuum wet surfaces, large objects, or hot ashes.

Specifications

• Model: Shark NP319C.
• Technology: DuoClean PowerFins with self-cleaning brushroll.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 dry quarts.
• Weight: 14.5 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, wand release button, suction control slider.

Body: Dust cup release, brushroll access latch, cord wrap hooks.

Modes: Upright (floor cleaning), Handheld (for attachments), Above-floor (with wand and hose). Settings: Suction power (adjust via slider), brushroll on/off (for hard floors).

Using Attachments

Accessories for specialized cleaning.

1. Convert to handheld: Press wand release, remove wand and hose.
2. Attach tools: Connect crevice tool, dusting brush, or upholstery tool to hose end.
3. Clean above floor: Use for furniture, stairs, ceilings, and tight spaces.
4. Return to upright: Reattach wand and hose until clicks are heard.

Tip: Store attachments on vacuum body or wall mount for easy access.

Cleaning Modes

Optimize for different surfaces.

1. Carpet mode: Default setting; brushroll spins for deep cleaning.
2. Hard floor mode: Turn off brushroll via button (if equipped) to prevent scattering debris.
3. Area rug mode: Use suction only; avoid brushroll on delicate rugs.
4. Above-floor mode: Use attachments for dusting, upholstery, and crevices.

WARNING! Do not use on wet surfaces. Keep rotating brushroll away from cords and curtains.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full or after each use.
2. Clean filters: Rinse foam and felt filters monthly; air dry completely before reinstalling.
3. Clear brushroll: Remove hair and debris from brushroll regularly.
4. Check blockages: Inspect hose, wand, and nozzle for clogs if suction decreases.
5. Store properly: Wrap cord, store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged filters or parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if motor overheats; plug back in.

Service: 1-800-798-7398; sharkclean.com