Shark NP319 series Vacuum Cleaner Manual

The Shark NP319 series is a versatile upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a lightweight, swivel steering design. It includes a detachable pod for above-floor cleaning, a variety of attachments, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean floor head, detachable pod, wand, hose, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the wand: Insert into the main body until it clicks.
2. Connect the hose: Attach to the port on the back of the vacuum.
3. Install the floor head: Align and click into place at the base of the wand.
4. Store accessories: Place tools in the built-in caddy.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug into a standard 120V outlet; turn on power switch.

1. Select floor type: Use floor selector for carpets or hard floors.
2. Begin vacuuming: Push vacuum forward and back in overlapping strokes.
3. Use attachments: Detach pod for above-floor cleaning; attach desired tool.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model Series: NP319.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 0.9 dry quarts.
• Attachments Included: Crevice tool, dusting brush, upholstery tool.
• Weight: 12.5 lbs.
• Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on the handle and body.

Handle: Power switch, floor selector (Carpet/Hard Floor).

Body: Wand release button, dust cup release, hose connector.

Operation: Turn on with power switch; select floor type; adjust suction as needed. Use wand release to detach for above-floor cleaning. LED lights activate automatically when powered on.

Using Attachments

Detach pod by pressing release button; connect desired tool.

1. Crevice tool: For tight spaces, corners, and edges.
2. Dusting brush: For delicate surfaces, shelves, and blinds.
3. Upholstery tool: For sofas, chairs, and stairs.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Two primary modes: Floor cleaning and above-floor cleaning.

1. Floor cleaning: Use with floor head attached; select carpet or hard floor setting.
2. Above-floor cleaning: Detach pod; attach wand and desired tool.
3. Furniture cleaning: Use upholstery tool on low suction.
4. Edge cleaning: Use crevice tool along baseboards.

WARNING! Do not use on wet surfaces. Keep hair and loose clothing away from brush rolls.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Check and clean brush rolls monthly; remove tangled debris.
3. Inspect filters; rinse every 3 months (air dry completely).
4. Store in a dry place; wrap cord around hooks.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com