Shark NP319 40 Vacuum Cleaner Manual

The Shark NP319 40 is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and a multi-surface brush roll. It includes a detachable pod for above-floor cleaning, various attachments, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean PowerFins brush roll, Detachable Pod, Dust Cup, Handle with controls, Power cord, and various attachments.

FeatureDescription
DuoClean PowerFinsDual brush rolls for deep carpet cleaning and hard floor debris pickup
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Large Capacity Dust CupEasy-to-empty, no-touch dust cup
Detachable PodConverts to a portable canister for above-floor cleaning
Multi-Surface Brush RollAutomatically adjusts between carpets and hard floors
POWER/SURFACE SwitchSelects between hard floor and carpet cleaning modes
Handle Release ButtonReclines handle for under-furniture cleaning
Dust Cup ReleaseButton to detach dust cup for emptying
Attachment DockStores crevice tool and dusting brush on board

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

  1. Attach Handle: Insert handle into main body until it clicks into place.
  2. Install Dust Cup: Slide dust cup into the rear slot until it locks.
  3. Attach Hose: Connect the hose to the pod inlet and secure.
  4. Store Attachments: Place crevice tool and dusting brush into the dock on the handle.
  5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow operational steps.

  1. Select Surface Mode: Use POWER/SURFACE switch to choose between Hard Floor or Carpet.
  2. Adjust Handle: Press handle release to recline for under-furniture cleaning.
  3. Begin Vacuuming: Push vacuum forward and back in slow, overlapping strokes.
  4. Empty Dust Cup: Press release button, hold over trash can, and press bottom lid to empty.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll while in operation.

Specifications

Controls and Settings

Main controls located on handle. POWER/SURFACE Switch: Toggle between floor types. Handle Release: Reclines handle. Dust Cup Release: Button to remove dust cup.

Indicator Lights: LED headlights activate automatically. Brush Roll Indicator: Flashes if brush roll is clogged.

Settings: No electronic settings menu. Operation is manual via physical switches and buttons.

Using Attachments

For above-floor cleaning: Detach pod from main body.

  1. Turn off and unplug vacuum.
  2. Press Pod Release button and lift pod away from main body.
  3. Attach desired tool (crevice, dusting brush, upholstery) to hose end.
  4. Plug in vacuum and use pod handle to clean stairs, furniture, etc.

Tip: Ensure hose is fully clicked into pod inlet to prevent loss of suction.

Cleaning Modes

Three primary cleaning modes.

  1. Hard Floor Mode: POWER/SURFACE switch set to hard floor icon. Brush roll slows for efficient debris pickup.
  2. Carpet Mode: Switch set to carpet icon. Activates PowerFins for deep carpet cleaning.
  3. Above-Floor Mode: Pod detached. Use attachments for detailed cleaning of upholstery, stairs, ceilings.

WARNING! Do not use hard floor mode on thick carpets as it may reduce effectiveness.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty Dust Cup: After each use or when full.
  2. Clean Filters: Wash foam and felt filters every 3 months (air dry completely).
  3. Clear Brush Roll: Remove hair and debris wrapped around brush roll monthly.
  4. Check for Blockages: Inspect hose, pod inlet, and nozzle for clogs if suction reduces.

CAUTION! Unplug vacuum before all maintenance. Do not use water on main body or electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup or clogEmpty dust cup; check hose, nozzle, and pod for blockages.
Brush roll not spinningClog or overloadUnplug, clear debris from brush roll; ensure carpet mode is selected.
Vacuum won't turn onPower cord or outletCheck power cord connection; try different outlet; check household fuse.
Pod detaches unexpectedlyRelease button engagedEnsure pod is fully clicked into main body; avoid pressing release during use.
Unusual noiseForeign object in brush roll or impellerUnplug, inspect brush roll and air path for obstructions like coins or hair.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark NP319 40 Vacuum Cleaner Manual © - All Rights Reserved 2025