Shark NP317W Vacuum Cleaner Manual

The Shark NP317W is a versatile upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a lightweight, swivel-steering design. It includes multiple cleaning modes for carpets and hard floors, a detachable pod for portable cleaning, and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Care 8. Safety Features 9. Storage & Handling 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean brushroll, Anti-Allergen Complete Seal filtration, LED headlights, detachable pod, swivel steering, large dust cup, and multiple attachments.

FeatureDescription
DuoClean TechnologyCombines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Detachable PodConverts to a portable vacuum for above-floor cleaning
Swivel SteeringManeuvers easily around furniture and obstacles
Large Dust Cup0.9-quart capacity for fewer emptyings
Cleaning ModesHard Floor, Carpet, and Bare Floor settings
AttachmentsCrevis tool, dusting brush, upholstery tool included
Power Cord25-foot length for extended reach
Washable FiltersEasy to clean and maintain

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach handle: Insert handle into main body until it clicks into place.
  2. Install hose: Connect hose to the front of the vacuum; ensure secure fit.
  3. Attach cleaning wand: Insert wand into hose connector.
  4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

  1. Select floor type: Use mode switch for Hard Floor or Carpet.
  2. Adjust suction: Use suction control for delicate rugs or high-pile carpets.
  3. Turn on LED lights: Automatically activate when vacuum is powered on.
  4. Detach pod: Press release button to convert to portable vacuum for stairs or furniture.

CAUTION! Keep vacuum away from water and wet surfaces. Do not use on wet spills.

Specifications

Controls and Settings

Access controls via handle and body. Power Switch: On/Off button on handle. Mode Selector: Switch between Hard Floor and Carpet. Suction Control: Dial on body for adjusting suction power. Pod Release: Button to detach pod for portable cleaning.

LED Indicators: Lights indicate power status and filter maintenance needs.

Settings: Hard Floor mode (for tiles, wood), Carpet mode (for low to high-pile carpets), Bare Floor setting (for delicate surfaces). Suction control: Adjust for optimal cleaning on different surfaces.

Cleaning Modes & Attachments

Hard Floor: Use for tiles, hardwood, laminate. Carpet: Use for rugs and carpets. Attachments: Crevis tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.

  1. Turn off vacuum before changing attachments.
  2. Select appropriate tool for cleaning task.
  3. Attach tool to wand or hose end.

Tip: Use dusting brush for delicate surfaces to avoid scratches.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button; empty when full.
  2. Clean filters: Remove and rinse under cold water every 3 months; air dry completely.
  3. Check brushroll: Remove debris wrapped around brushroll regularly.
  4. Inspect hose: Clear any blockages to maintain suction.
  5. Store properly: Wind cord around hooks; store in dry place.

WARNING! Unplug vacuum before maintenance. Do not use damaged parts.

Safety Features

Overheat Protection: Automatically shuts off if motor overheats. Anti-Allergen Seal: Prevents allergens from escaping. Brushroll Shutoff: Stops brushroll when vacuum is upright.

Storage & Handling

Store in cool, dry place. Wind power cord around storage hooks. Detach hose and attachments for compact storage.

CAUTION! Do not store vacuum with wet filters. Keep away from children and pets.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck power cord connection; try different outlet; ensure On/Off switch is pressed.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose and attachments for blockages; clean filters.
Brushroll not spinningDebris/tangleTurn off vacuum; remove debris from brushroll; ensure vacuum is in floor mode.
OverheatingBlockage/overuseTurn off and unplug; let cool for 30 minutes; clear any blockages.
LED lights not workingConnection/switchEnsure vacuum is powered on; check handle connection; contact support if issue persists.

Reset: Unplug for 10 minutes; plug back in to reset motor.

Service: 1-800-798-7398; www.sharkclean.com

Shark NP317W Vacuum Cleaner Manual © - All Rights Reserved 2025