Shark NP317W 40 Vacuum Cleaner Manual

The Shark NP317W 40 is a powerful upright vacuum cleaner featuring a 40-foot power cord, Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, DuoClean floor nozzle for carpets and hard floors, LED headlights, and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Maintenance & Care 8. Accessories 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with Lift-Away pod, DuoClean floor nozzle, 40-foot power cord, LED headlights, HEPA filter, dust cup, and accessory storage.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable above-floor cleaning
DuoClean Floor NozzleDual brush rolls for carpets and hard floors
Anti-Allergen Complete SealHEPA filter traps 99.9% of dust and allergens
LED HeadlightsIlluminates dark areas under furniture
40-foot Power CordExtended reach for large rooms
Large Dust CupEasy-empty, no-touch dirt disposal
Accessory StorageBuilt-in caddy for crevice tool and dusting brush
Power SwitchTurns vacuum on/off
Brush Roll ControlEnables/disables brush roll for hard floors
Handle ControlsAdjust suction power and settings

Assembly & Setup

Unpack and inspect contents. Assemble following steps.

  1. Attach handle: Insert handle into upright body until it clicks securely.
  2. Install floor nozzle: Align nozzle with upright body and push until locked.
  3. Insert HEPA filter: Place filter into compartment at back of dust cup.
  4. Attach accessories: Store crevice tool and dusting brush in built-in caddy.
  5. Plug into AC power.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure assembly is complete and filter is installed.

  1. Power on: Press power switch on body.
  2. Select mode: Use handle controls to choose suction setting (Low/High).
  3. Test on floor: Move vacuum forward and backward on carpet or hard floor.
  4. Empty dust cup: Press release button to remove and empty cup after use.
  5. Check brush roll: Ensure it rotates freely without obstruction.

CAUTION! Do not vacuum large objects or liquids. Keep cord away from rotating brush.

Specifications

Controls and Settings

Access controls via handle and body buttons. Power Switch: On/Off. Handle Controls: Suction power (Low/High), brush roll on/off.

LED Indicators: Headlights activate automatically in dark areas. Dust Cup Full Indicator: Alerts when cup needs emptying.

Settings: Suction power adjustment for different surfaces. Brush roll control for hard floors (turn off to prevent scattering debris). Lift-Away release button for detaching pod.

Cleaning Modes

Upright Mode: For floor cleaning. Lift-Away Mode: Detach pod for stairs, furniture, above-floor areas.

  1. Select upright mode for floors.
  2. Press Lift-Away release to detach pod.
  3. Use accessories for crevices, upholstery, dusting.
  4. Reattach pod by aligning with upright body until click.

Tip: Use high suction for carpets, low for delicate rugs and hard floors.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filter monthly: Rinse HEPA filter under cold water, air dry 24 hours.
  3. Check brush roll: Remove hair and debris wrapped around roll.
  4. Inspect nozzle: Clear blockages from air passages.
  5. Store in dry area, wrap cord around cord hooks.

WARNING! Unplug before maintenance. Do not use damaged parts.

Accessories

Included: Crevice tool, dusting brush, upholstery tool. Use crevice tool for tight spaces. Dusting brush for shelves and blinds. Upholstery tool for sofas and curtains.

Safety Information

Unplug when not in use. Do not vacuum burning items, liquids, or large objects. Keep hair, loose clothing, fingers away from moving parts.

CAUTION! Do not use outdoors or on wet surfaces. Avoid pulling cord to unplug.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum not turning onPower cord/outletCheck plug connection; try different outlet; ensure power switch is on.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose and nozzle for blockages; clean filter.
Brush roll not spinningObstruction/settingRemove debris from brush roll; ensure brush roll control is on.
Vacuum overheatingClog/filterUnplug, let cool; clear clogs; clean filter; check for obstructions.
Unusual noiseForeign objectTurn off, unplug; inspect brush roll and nozzle for objects.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; www.sharkclean.com

Shark NP317W 40 Vacuum Cleaner Manual © - All Rights Reserved 2025