Shark NINJA IQRobot UR1000SR Series Vacuum Cleaner Manual

The Shark NINJA IQRobot UR1000SR Series is an advanced robotic vacuum cleaner featuring smart mapping, Wi-Fi connectivity, app control, self-emptying base, multi-surface cleaning, anti-tangle brushroll, and voice assistant compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Emptying Base, Charging Dock, Remote Control, Side Brushes, Filter, Dust Bin.

Feature	Description
Smart Mapping	Creates a map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to home network for app control
Self-Emptying Base	Automatically empties robot's dust bin
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Anti-Tangle Brushroll	Prevents hair wrap for pet-friendly cleaning
Voice Control	Works with Alexa and Google Assistant
Boundary Strips	Virtual barriers to restrict cleaning areas
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Spot Cleaning	Intensive clean of a concentrated area
Edge Cleaning	Special mode for cleaning along walls and edges

Installation & Setup

Unpack and inspect contents. Place base on level surface.

Charge the robot: Place robot on charging dock; ensure power indicator lights up.
Install side brushes: Attach left and right side brushes to robot base.
Set up self-emptying base: Connect power cord to base and wall outlet.
Clear the area: Remove small objects, cords, and clutter from floor.

WARNING! Keep robot away from stairs and wet areas. Ensure charging contacts are clean.

First-Time Configuration

Power on robot; follow initial setup prompts.

Download SharkClean app: Available on iOS and Android.
Connect to Wi-Fi: Press Wi-Fi button on robot; follow app instructions.
Create smart map: Let robot perform initial mapping run.
Set up rooms & zones: Use app to label rooms and set no-go zones.
Configure schedule: Set daily or weekly cleaning times in app.

CAUTION! Ensure Wi-Fi signal is strong in cleaning area for optimal performance.

Specifications

Model: UR1000SR Series
Power Source: Rechargeable lithium-ion battery
Run Time: Up to 90 minutes per charge
Charging Time: Approximately 4 hours
Dust Bin Capacity: 0.5 liters (robot), 1.5 liters (base)
Noise Level: 65 dB (Quiet mode)
Connectivity: 2.4 GHz Wi-Fi, Bluetooth
Compatibility: iOS 11+, Android 7+
Weight: 7.5 lbs (3.4 kg)
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access controls via physical buttons, remote, or app.

Robot Buttons: POWER, SPOT CLEAN, DOCK, Wi-Fi.

Remote: POWER, DOCK, SPOT, ROOM CLEAN, EDGE, SCHEDULE, MAX SUCTION.

App Features: Start/Stop, Schedule, Select Rooms, Set No-Go Zones, Cleaning History, Suction Power (Eco, Normal, Max), Error Notifications.

Voice Commands: "Alexa, ask Shark to start cleaning" or "Hey Google, tell Shark to dock."

Connecting to Wi-Fi & App

Connect robot to home network for full functionality.

Ensure robot is powered on and near router.
Press and hold Wi-Fi button on robot until light blinks.
Open SharkClean app and follow setup wizard.
Select home Wi-Fi network and enter password.
Wait for connection confirmation in app.

Tip: Use 2.4 GHz network (not 5 GHz) for compatibility.

Cleaning Modes & Scheduling

Multiple cleaning modes for different needs.

Auto Mode: Robot cleans entire mapped area efficiently.
Room Select: Clean specific rooms via app selection.
Spot Cleaning: Concentrated 3-foot diameter cleaning.
Edge Cleaning: Focus on perimeter and wall edges.
Max Suction: Maximum power for deep carpet cleaning.
Eco Mode: Quiet operation with extended battery.
Scheduling: Set daily/weekly cleaning via app or remote.

WARNING! Remove fragile items from floor before cleaning. Keep pets away during operation.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust bin: After each cleaning cycle or when full.
Clean filter: Tap gently monthly; replace every 3 months.
Clear brushroll: Remove hair and debris weekly.
Wipe sensors: Clean cliff and bumper sensors with dry cloth.
Check side brushes: Remove tangled hair monthly.
Clean charging contacts: Wipe with dry cloth monthly.

CAUTION! Unplug base before maintenance. Do not use water on robot electronics.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device complies with Industry Canada license-exempt RSS standard(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/not docked	Place on charger; ensure power outlet works.
Poor cleaning performance	Full dust bin/clogged filter	Empty bin; clean filter and brushroll.
Robot gets stuck	Obstacles/cluttered area	Clear floor of cords and small objects.
Wi-Fi connection lost	Weak signal/router issues	Move robot closer to router; restart robot and app.
Error beeps/red light	Wheel/brush obstruction	Check for stuck debris; clean wheels and sensors.
Not returning to dock	Blocked path/dirty sensors	Clear path to dock; clean dock sensors and robot.

Reset: Hold DOCK and SPOT buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com/support