Shark NH130 Vacuum Cleaner Manual

The Shark NH130 is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes (carpet, hard floor, above-floor), a detachable canister for portable cleaning, a motorized brushroll, LED headlights, and a swivel steering head for easy maneuverability. It includes various attachments for crevices, upholstery, and dusting. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Detachable pod, Motorized brushroll, LED headlights, Swivel steering head, Hose, Wand, and Cleaning attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Connect the hose: Attach the hose to the port on the back of the vacuum.
3. Attach the wand: Insert the wand into the hose handle until it locks.
4. Install attachments: Store attachments on the provided caddy or clip onto the vacuum.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep cord away from heat and sharp edges.

First-Time Use

Before first use, ensure filters are installed correctly.

1. Check filters: Ensure both the foam and felt filters are in place inside the dust cup.
2. Select cleaning mode: Use the floor selector switch (Carpet/Hard Floor).
3. Power on: Press the power switch on the body.
4. Adjust height (if applicable): Some models have adjustable cleaning height.
5. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark NH130.
• Type: Upright vacuum with detachable pod.
• Filtration: HEPA filtration system.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 dry quarts.
• Cleaning Path: 10 inches.
• Weight: 14.5 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on the vacuum body and handle.

On-Body Controls: Power Switch, Brushroll On/Off Switch, Floor Selector (Carpet/Hard Floor), Cord Release.

Handle Controls: Hose Release button, Wand Release button.

Settings: Carpet Mode (brushroll on), Hard Floor Mode (brushroll off), Above-Floor Mode (using detachable pod with attachments).

Cleaning Modes & Attachments

Use the appropriate mode and attachment for each cleaning task.

1. Upright Carpet Cleaning: Set floor selector to CARPET. Use slow, overlapping passes.
2. Upright Hard Floor Cleaning: Set floor selector to HARD FLOOR (turns off brushroll).
3. Above-Floor Cleaning: Detach the pod by pressing the release button. Attach hose, wand, and desired tool (crevice, upholstery, dusting brush).
4. Under Furniture: Use LED headlights to see and the low-profile design to reach.

Tip: For best results on carpets, make several passes in different directions.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Check and clear brushroll regularly: Remove hair and string wrapped around it.
2. Inspect hose and wand for clogs: Detach and look through for blockages.
3. Check wheels and swivel head: Remove debris that may impede movement.
4. Store properly: Wrap cord around cord hooks, store attachments on caddy.

WARNING! Always unplug the vacuum before performing any maintenance.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

1. Turn off and unplug the vacuum.
2. Press the dust cup release button and lift the cup off the vacuum.
3. Hold over a trash can. Press the bottom release latch to open the door.
4. Tap gently to remove all debris. Close the door securely.
5. Reattach the dust cup until it clicks into place.

CAUTION! Do not overfill. Empty after each use for best suction.

Filter Cleaning

Clean filters every 3 months for optimal performance.

1. Unplug vacuum. Remove dust cup.
2. Remove the foam and felt filters from the top of the dust cup.
3. Rinse filters under lukewarm water until water runs clear. Do not use soap.
4. Air dry filters completely for at least 24 hours before reinstalling.
5. Reinstall dry filters and dust cup.

IMPORTANT: Never operate the vacuum without filters or with wet filters.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and associated logos are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com