Shark Navigator UV725 Series Vacuum Cleaner Manual

The Shark Navigator UV725 Series is an upright vacuum cleaner featuring Anti-Allergen Complete Seal Technology, a HEPA filter, Lift-Away functionality for portable cleaning, a motorized brushroll for carpets, a wide upholstery tool, a dusting brush, and a crevice tool. It is designed for deep cleaning on both carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized brushroll, wide upholstery tool, dusting brush, crevice tool, HEPA filter, and hose assembly.

Feature	Description
Anti-Allergen Complete Seal	Seals in dust and allergens inside the vacuum
HEPA Filter	Captures 99.9% of dust and allergens
Lift-Away Function	Detachable pod for portable above-floor cleaning
Motorized Brushroll	Deep cleans carpets and agitates debris
Wide Upholstery Tool	For cleaning furniture, stairs, and auto interiors
Dusting Brush	For delicate surfaces like blinds and lampshades
Crevice Tool	For tight spaces like corners and between cushions
On-Board Tool Caddy	Stores attachments on the vacuum for easy access
Carpet/Floor Selector	Adjusts brushroll height for different floor types
Power Switch	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks securely.
Install hose: Connect hose to pod and ensure it is locked in place.
Attach wand: Insert wand into hose grip until it clicks.
Install tools: Place wide upholstery tool, dusting brush, and crevice tool into on-board caddy.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate floor setting.

Select floor type: Use Carpet/Floor selector switch (Carpet for high pile, Hard Floor for bare floors).
Turn on: Press Power switch to ON position.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Use Lift-Away: Press release button to detach pod for stairs or furniture cleaning.
Attach tools: Select appropriate tool from caddy for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model Series: Navigator UV725.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Cleaning Modes: Upright and Lift-Away portable.
Attachments: Wide upholstery tool, dusting brush, crevice tool.
Brushroll: Motorized, self-cleaning.
Dust Cup Capacity: [Specify volume, e.g., 1.5 quarts].
Power Cord Length: [Specify length, e.g., 25 feet].
Power Source: 120V AC, 60Hz.
Weight: [Specify weight, e.g., 15 lbs].

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Carpet/Floor selector, Lift-Away release button.

Settings: Carpet mode (brushroll spins for deep cleaning), Hard Floor mode (brushroll may stop or slow to prevent scattering debris). Lift-Away: Detach pod by pressing release button; reattach by aligning and pressing until click. Hose and wand: Use for above-floor cleaning with attachments.

Using Attachments

Attach tools to wand or hose for specialized cleaning.

Detach wand from upright body if using Lift-Away pod.
Select tool: Wide upholstery tool for furniture, dusting brush for delicate surfaces, crevice tool for tight spaces.
Attach tool: Push onto end of wand or hose until secure.
Turn on vacuum and clean target area.
Return tool to on-board caddy after use.

Tip: For best results, move tools slowly over surface to allow suction to pick up debris.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Check brushroll: Regularly remove hair and fibers wrapped around brushroll.
Inspect hose and wand: Clear any blockages if suction is reduced.
Wipe exterior: Use dry cloth to clean vacuum body and attachments.
Store properly: Wind cord around cord hooks; store in dry area.

WARNING! Always unplug vacuum before performing any maintenance or clearing blockages.

Emptying the Dust Cup

Empty dust cup when it reaches MAX fill line.

Turn off and unplug vacuum.
Press dust cup release button to remove cup from pod.
Hold over trash can; press bottom release latch to open door and empty contents.
Close door securely and reattach dust cup to pod until it clicks.

CAUTION! Empty dust cup outdoors or in well-ventilated area to minimize dust exposure.

Filter Care

HEPA filter and pre-motor filter require regular cleaning.

Unplug vacuum and remove dust cup.
Access filters: HEPA filter located behind dust cup; pre-motor filter may be in pod.
Clean filters: Tap gently to remove dust; rinse with cold water if washable (allow to dry completely for 24 hours).
Reinstall filters only when completely dry.

Note: Do not use vacuum without filters installed. Replace filters every [e.g., 12 months] or as needed.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check power outlet; ensure cord is plugged in; verify Power switch is ON.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinning	Obstruction/selector setting	Clear hair/debris from brushroll; ensure selector is in Carpet mode.
Vacuum is difficult to push	Brushroll height/carpet type	Adjust Carpet/Floor selector to appropriate height for carpet pile.
Dust leaking from vacuum	Dust cup not sealed/filter issue	Ensure dust cup is locked securely; check that filters are properly installed and clean.

Reset: Unplug vacuum for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com