Shark Navigator SWIVELPRO Vacuum Cleaner Manual

The Shark Navigator SWIVELPRO is an upright vacuum cleaner featuring Swivel Steering technology for easy maneuverability, Anti-Allergen Complete Seal Technology, a Lift-Away pod for portable cleaning, a large-capacity dust cup, motorized brushroll for carpets, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with Swivel Steering, Lift-Away pod, Motorized brushroll, Dust cup with filter system, Handle with controls, Hose, and Cleaning attachments.

Feature	Description
Swivel Steering	Allows 360-degree maneuverability around furniture and obstacles
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Lift-Away Pod	Detachable canister for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Large Capacity Dust Cup	Holds more debris, reducing emptying frequency
Cleaning Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning
Height Adjustment	Adjusts cleaning head height for different floor types
Wand Release	Button to detach wand for above-floor cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

Attach Handle: Insert handle into top of vacuum body until it clicks securely.
Install Wand: Insert wand into hose connector on front of vacuum.
Attach Hose: Connect hose end to port on back of vacuum body.
Attach Floor Nozzle: Connect floor nozzle to bottom of wand until it locks.
Install Filters: Ensure pre-motor and post-motor filters are correctly seated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure assembly is complete and filters are installed.

Clear area: Remove large debris or obstacles from floor.
Adjust height: Set floor nozzle height appropriate for your floor type (carpet/hard floor).
Power on: Plug in, press power switch to ON position.
Begin cleaning: Push vacuum forward; Swivel Steering allows easy direction changes.
Use attachments: Detach wand and attach tools for furniture, stairs, or crevices.

CAUTION! Do not vacuum wet spills, large hard objects, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator SWIVELPRO.
Technology: Swivel Steering, Anti-Allergen Complete Seal, Lift-Away.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Filtration: HEPA filter & foam filter included.
Brushroll: Motorized, with on/off control.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brushroll on/off button, Wand release button.

Settings: Height adjustment lever (multiple settings for carpets/rugs/hard floors), Suction control (if applicable). Maintenance indicators: Filter check light, Dust cup full indicator. Use Brushroll on/off to switch between carpet cleaning (ON) and hard floor/delicate rugs (OFF).

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, blinds.

Detach wand: Press wand release button and pull wand out.
Choose attachment: Connect crevice tool, dusting brush, or upholstery tool to wand end.
Clean: Use hose and wand to reach tight spaces, furniture, or drapes.
Reattach: Return wand to vacuum body after use.

Tip: For high reach, attach extension wand (if included). Ensure attachments click securely into place.

Lift-Away Mode

Detach pod for portable cleaning.

Press release button on back of vacuum to detach Lift-Away pod.
Carry pod by handle; hose remains connected.
Clean stairs, furniture, or other above-floor areas with attachments.
Return pod: Align with main body and push down until it clicks.

WARNING! Ensure pod is securely attached before resuming upright vacuuming. Do not lift by hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove cup, empty into trash. Do not overfill.
Clean filters: Rinse pre-motor foam filter and post-motor HEPA filter every 3 months. Air dry completely before reinserting.
Clear brushroll: Turn vacuum over, remove cover, cut away wrapped hair/debris from brushroll.
Check hose/wand for clogs: Detach and inspect if suction is reduced.
Wipe exterior: Use dry cloth; no liquids.

CAUTION! Unplug before maintenance. Never use vacuum without filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is ON.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinning	Brushroll on/off setting/obstruction	Ensure brushroll is set to ON; clear hair/debris from brushroll area.
Vacuum is hard to push	Height setting/brushroll	Adjust height to appropriate setting; turn brushroll OFF for hard floors.
Lift-Away pod not detaching	Release button/locking mechanism	Press release button firmly; check for obstructions in locking mechanism.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com