Shark Navigator Swivel Pro Plus Vacuum Cleaner Manual

The Shark Navigator Swivel Pro Plus is a versatile upright vacuum cleaner featuring Swivel Steering for easy maneuverability, Anti-Allergen Complete Seal Technology, a Lift-Away pod for portable cleaning above the floor, a large-capacity dust cup, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Swivel steering head, Lift-Away pod, Dust cup with filter, Handle with controls, Hose, and various attachments.

Feature	Description
Swivel Steering	Allows the vacuum head to pivot for easy navigation around furniture
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap 99.9% of dust and allergens
Lift-Away Pod	Detachable canister for portable cleaning of stairs, upholstery, and above-floor areas
Large Dust Cup	Easy-to-empty, bagless dust cup with large capacity
Brushroll On/Off	Switch to turn brushroll on for carpets or off for hard floors
Fingertip Controls	Power and brushroll controls located on the handle
Attachments	Includes crevice tool, dusting brush, upholstery tool, and pet power brush
Wand Release	Button to detach the wand for extended reach
Cord Length	25-foot power cord with cord wrap
Warranty	Limited warranty included (refer to manual for details)

Assembly & Setup

Unpack all parts from the box and inspect for damage.

Attach the handle: Insert the handle into the main body until it clicks into place.
Install the wand: Insert the wand into the hose socket on the front of the vacuum.
Attach the hose: Connect the hose to the port on the back of the vacuum body.
Attach cleaning tools: Store attachments on the accessory holder or connect as needed.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure the HEPA filter and pre-motor filter are properly seated.
Select surface setting: Use the brushroll on/off switch. ON for carpets, OFF for hard floors.
Adjust height (if applicable): Some models have automatic height adjustment.
Power on: Press the power button on the handle.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator Swivel Pro Plus (NV series).
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: [Specify capacity, e.g., 1.5 quarts].
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Cleaning Modes: Upright and Lift-Away.
Attachments Included: Crevice tool, dusting brush, upholstery tool, pet power brush.
Weight: Approximately [e.g., 15 lbs].
Warranty: Limited warranty as specified in manual.

Controls and Functions

Main controls are located on the handle for easy access.

Handle Controls: POWER button (turns vacuum on/off), BRUSHROLL ON/OFF switch (activates/deactivates brushroll for carpets/hard floors).

Body Features: LIFT-AWAY RELEASE button (detaches pod), DUST CUP RELEASE button (empties dust cup), HOSE RELEASE (detaches hose for attachments), CORD WRAP (stores power cord).

Settings: Brushroll on for deep carpet cleaning; brushroll off for hard floors to prevent scattering debris. Use suction control (if available) for delicate rugs.

Using Attachments

Attachments allow for detailed cleaning of various surfaces.

Detach the wand: Press the wand release button and pull the wand out.
Select attachment: Choose crevice tool, dusting brush, upholstery tool, or pet power brush.
Connect: Insert the attachment into the end of the wand or hose.
Clean: Use the attachment for tight spaces, furniture, stairs, or pet hair.
Return: Store attachments on the accessory holder when not in use.

Tip: For pet hair, use the motorized pet power brush (if included) on upholstery and stairs.

Lift-Away Mode

The Lift-Away pod detaches for portable cleaning.

Detach: Press the Lift-Away release button on the main body and lift the pod away.
Use hose and wand: The pod includes the hose and wand for above-floor cleaning.
Clean stairs/upholstery: Carry the pod to clean stairs, furniture, ceilings, or other hard-to-reach areas.
Reattach: Place the pod back onto the main body until it clicks into place.

WARNING! Ensure the pod is securely attached before using in upright mode. Do not lift by the hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button and empty when full or after each use.
Clean filters: Rinse HEPA filter and pre-motor filter with cold water every 3 months. Air dry completely for 24 hours before reinstalling.
Check for clogs: Remove hose and wand to check for blockages if suction is reduced.
Clean brushroll: Remove hair and debris from brushroll regularly. Cut tangled fibers with scissors if necessary.
Inspect belt (if applicable): Replace if worn or damaged.

CAUTION! Unplug vacuum before performing any maintenance. Do not use damaged filters or brushroll.

Regulatory Information

This appliance complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact customer service at 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord not plugged in; outlet issue	Plug into working outlet; check circuit breaker.
Loss of suction	Full dust cup; clogged hose/filter; blockage	Empty dust cup; check and clear hose, wand, and filters.
Brushroll not spinning	Brushroll off; tangled debris; belt issue	Turn brushroll on; clean brushroll; inspect/replace belt.
Vacuum is difficult to push	Height setting too low; clogged brushroll	Adjust height (if available); clean brushroll of debris.
Dust escaping from vacuum	Filter not installed; dust cup not sealed	Ensure filters are correctly installed and dry; close dust cup securely.

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com