Shark Navigator Swivel Pro Complete Vacuum Cleaner Manual

The Shark Navigator Swivel Pro Complete is a versatile upright vacuum cleaner featuring Swivel Steering for easy maneuverability, Anti-Allergen Complete Seal Technology with a HEPA filter, Lift-Away functionality for portable cleaning, a large dust cup capacity, motorized brushroll for carpets, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes 7. Using Attachments 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with Swivel Steering, Lift-Away pod, motorized floor nozzle, dust cup with HEPA filter, crevice tool, dusting brush, and upholstery tool.

Feature	Description
Swivel Steering	Allows 360-degree maneuverability around furniture and obstacles
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Lift-Away Functionality	Detachable pod for portable cleaning of stairs, furniture, and above-floor areas
Motorized Brushroll	Deep cleans carpets and actively agitates dirt
Large Dust Cup	Easy-to-empty, bagless dust cup with generous capacity
Attachments Included	Crevice tool, dusting brush, upholstery tool for versatile cleaning
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning
Height Adjustment	Multiple settings for different carpet pile heights
Cord Length	Extended power cord for wide cleaning radius

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach handle: Insert handle into upright body until it clicks securely into place.
Install floor nozzle: Connect the motorized floor nozzle to the vacuum body, ensuring it locks.
Attach hose and wand: Connect the hose to the pod and attach the wand to the hose end.
Install filters: Place the HEPA filter and pre-motor filter into their designated compartments.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure assembly is complete and filters are installed.

Check cord length: Fully unwind the power cord from the cord wrap.
Select cleaning mode: Choose between upright mode for floors or Lift-Away mode for above-floor cleaning.
Adjust height: Set the floor nozzle height appropriate for your carpet or floor type.
Power on: Press the power switch and begin cleaning.
Empty dust cup: After initial use, empty the dust cup to ensure optimal performance.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes. Keep vacuum on level surfaces during use.

Specifications

Model: Shark Navigator Swivel Pro Complete.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Cleaning Modes: Upright and Lift-Away portable mode.
Maneuverability:Swivel Steering for 360-degree movement. Filtration: Sealed system, HEPA filter, washable pre-motor filter.
Dust Cup Capacity: [Specify capacity, e.g., 1.5 quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Warranty: Limited warranty as specified by Shark.

Controls and Parts

Main unit controls: Power switch, Brushroll on/off switch, Height adjustment lever, Lift-Away release button.

Key Parts: Upright body, Lift-Away pod, Motorized floor nozzle, Hose and wand assembly, Dust cup with HEPA filter, Pre-motor filter, Cord wrap, Attachments (crevice tool, dusting brush, upholstery tool).

Operation: Use power switch to turn on/off. Engage/disengage brushroll for carpets/hard floors. Adjust height for optimal cleaning. Press release button to detach pod for Lift-Away mode. Use attachments for detailed cleaning.

Cleaning Modes

Upright Mode: For cleaning carpets and large floor areas. Lift-Away Mode: Detach pod to clean stairs, furniture, under furniture, and other above-floor surfaces.

Select mode: For floors, use upright. For portable cleaning, press release button to detach pod.
Attach tools: In Lift-Away mode, connect desired attachment to wand or hose.
Clean: Move vacuum slowly over surface for effective dirt pickup.
Return to upright: Reattach pod to body until it clicks into place.

Tip: For best results on carpets, make slow, overlapping passes.

Using Attachments

Attachments enhance cleaning versatility.

Crevice Tool: For tight spaces like between cushions, along baseboards, and in corners.
Dusting Brush: For delicate surfaces like lampshades, blinds, and keyboards.
Upholstery Tool: For fabric surfaces like sofas, chairs, and curtains.
To use: Attach tool directly to hose or wand end. Select appropriate suction setting if available.

WARNING! Do not use attachments to vacuum hard, sharp objects that could damage the tool or hose.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: Regularly empty when dust reaches MAX line. Press release button to remove.
Clean filters: Wash pre-motor filter every 3 months. Replace HEPA filter as needed (approx. every 12-18 months).
Check brushroll: Regularly remove hair and debris wrapped around brushroll. Cut and remove with scissors if necessary.
Inspect hose and attachments: Clear any clogs. Wash dust cup and attachments with mild detergent as needed.
Store properly: Wrap cord, store in a dry place, and ensure all parts are secure.

CAUTION! Unplug vacuum before performing any maintenance. Allow all parts to dry completely before reassembly.

Regulatory Information

This appliance complies with relevant safety standards. Copyright and trademarks owned by SharkNinja Operating LLC. For support, replacement parts, or warranty service, visit sharkclean.com or contact customer service at 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose and nozzle of blockages.
Brushroll not spinning	Obstruction, belt issue, switch off	Turn brushroll on; remove debris from brushroll; check for worn belt and replace if necessary.
Vacuum won't turn on	Power source, cord issue	Check power outlet and cord connection; ensure power switch is on.
Vacuum tipping over	Incorrect height setting	Adjust floor nozzle to a higher setting for thick carpets.
Unusual noise	Obstruction in hose or nozzle	Turn off and unplug; inspect hose, wand, and nozzle for foreign objects.
Dust escaping from vacuum	Filter not installed correctly	Ensure all filters are properly seated and clean; replace if damaged.

Reset: For electrical issues, unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com