Shark Navigator Swivel Pro Complete NV151 Vacuum Cleaner Manual

The Shark Navigator Swivel Pro Complete NV151 is an upright vacuum cleaner featuring Swivel Steering for easy maneuverability, a Lift-Away pod for portable cleaning above the floor, Anti-Allergen Complete Seal Technology with a HEPA filter, a large-capacity dust cup, motorized brushroll for carpets, a crevice tool, dusting brush, and upholstery tool. Powered by a 120V AC motor. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes 7. Emptying the Dust Cup 8. Filter Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with Swivel Steering, Lift-Away pod, Motorized Brushroll, Anti-Allergen Complete Seal system, HEPA filter, Large Dust Cup, Hose, Wand, and Cleaning Tools.

Feature	Description
Swivel Steering	Allows the vacuum to pivot easily around furniture and obstacles
Lift-Away Pod	Detaches from the floor nozzle for portable above-floor cleaning
Anti-Allergen Complete Seal	Seals in dust and allergens with a HEPA filter
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Large Dust Cup	Holds debris; easy-empty bottom release
Cleaning Tools	Crevice tool, dusting brush, upholstery tool stored on board
ON/OFF Switch	Powers the vacuum motor
Brushroll On/Off	Disengages brushroll for hard floors or delicate rugs
Suction Control	Adjusts suction power for different surfaces
Handle Release	Button to detach the pod from the floor nozzle

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the handle: Slide the upper handle onto the pod until it clicks into place.
Attach the hose: Connect the hose end to the port on the front of the pod.
Attach the wand: Insert the wand into the hose grip until secure.
Attach floor nozzle: Align the pod with the floor nozzle and push down until it locks.
Install filters: Ensure both the pre-motor and HEPA filters are correctly seated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into a standard 120V outlet. Turn power ON.

Select cleaning mode: Use upright mode for floors; press Lift-Away release for above-floor cleaning.
Adjust suction: Use suction control dial for carpets or delicate rugs.
Engage brushroll: Ensure brushroll is ON for carpets; OFF for hard floors.
Use tools: Attach desired tool to wand for crevices, upholstery, or dusting.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark Navigator Swivel Pro Complete NV151.
Type: Upright vacuum with Lift-Away pod.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Steering: Swivel Steering for 360° maneuverability.
Dust Cup Capacity: 1.5 dry quarts.
Brushroll: Motorized, with on/off control.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Included Tools: Crevice tool, dusting brush, upholstery tool.

Controls and Parts

Main Controls: ON/OFF switch, Suction Control dial, Brushroll On/Off switch, Handle Release button.

Parts Diagram: Floor Nozzle, Pod, Handle, Hose, Wand, Dust Cup, Filters (Pre-motor & HEPA), Tool Caddy.

Upright Mode: For floor cleaning. Lift-Away Mode: Detach pod for stairs, furniture, and above-floor areas. Suction Control: Adjust from MIN to MAX. Brushroll Control: Turn off for hard floors to prevent scattering debris. Handle Release: Press to separate pod from floor nozzle.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: For portable cleaning.

Ensure vacuum is plugged in and power is ON.
For floors: Use in upright position; engage brushroll for carpets.
For above-floor: Press Handle Release, carry pod, attach tool to wand.
Switch tools as needed for different surfaces.

Tip: Clear area of large debris before vacuuming to prevent clogs.

Emptying the Dust Cup

Empty dust cup when full or after each use.

Turn off and unplug vacuum.
Press dust cup release button and lift cup off pod.
Hold over trash can; press bottom release latch to open door.
Shake gently to empty debris.
Close latch and reattach cup until it clicks.

WARNING! Do not operate with full dust cup. Empty outdoors if possible to minimize dust.

Filter Maintenance

Maintain filters every 3 months for optimal performance.

Pre-motor foam filter: Rinse under cold water; air dry 24 hours before reinstalling.
HEPA filter: Tap gently to remove dust; replace every 12-18 months.
Check filter compartment for debris before reinstalling filters.

CAUTION! Never operate vacuum without filters. Ensure filters are completely dry before use.

Care & Storage

Unplug before maintenance. Wipe exterior with dry cloth. Store in a dry place.

CAUTION! Do not use water or cleaners on electrical parts. Keep cord away from heated surfaces.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Obstruction/switch off	Turn brushroll ON; remove hair or string wrapped around brushroll.
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; check ON/OFF switch.
Unusual noise	Obstruction in airway	Turn off, unplug, and inspect hose, wand, and nozzle for debris.
Lift-Away pod not detaching	Release button not fully pressed	Press Handle Release firmly while lifting pod.

Reset: Unplug for 60 seconds if motor overheats.

Service: 1-800-798-7398; sharkclean.com