Shark Navigator Swivel Pro Complete NV150 Series Vacuum Cleaner Manual

The Shark Navigator Swivel Pro Complete NV150 Series is an upright vacuum cleaner featuring Swivel Steering for easy maneuverability, Anti-Allergen Complete Seal Technology with a HEPA filter, Lift-Away functionality for portable cleaning, a motorized brushroll for carpets, a wide upholstery tool, a dusting brush, a crevice tool, and a pet hair attachment. It includes a 30-foot power cord, a large-capacity dust cup, and various cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, troubleshooting, and warranty information.

Features at a Glance

Key components: Main vacuum body with Swivel Steering, Lift-Away pod, motorized floor nozzle, hose, wand, and accessory set.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the Handle: Insert the handle into the top of the main body until it clicks into place.
2. Connect the Hose: Attach the hose to the port on the front of the vacuum body.
3. Attach the Wand: Insert the wand into the hose handle until secure.
4. Install Floor Nozzle: Slide the motorized floor nozzle onto the bottom of the main body until it locks.
5. Store Accessories: Place attachments on the accessory holder or store in provided caddy.

WARNING! Ensure all parts are securely connected before use to prevent damage or injury. Keep fingers away from moving parts during assembly.

First-Time Use

Plug the vacuum into a standard 120V AC outlet. Ensure the dust cup is empty and filters are installed.

1. Select Cleaning Mode: Use the brushroll switch to select CARPET, HARD FLOOR, or DELICATE mode as needed.
2. Adjust Height (if applicable): Some models have a manual height adjustment for different carpet piles.
3. Begin Cleaning: Press the power switch to ON. Use swivel steering to navigate.
4. Use Lift-Away Mode: Press the release button to detach the pod for stairs, furniture, or above-floor cleaning.
5. Empty Dust Cup: When full, press the dust cup release button and empty contents into trash.

CAUTION! Do not vacuum wet surfaces, large debris, or hot ashes. Keep loose clothing and hair away from moving parts.

Specifications

• Model: NV150 Series (Navigator Swivel Pro Complete).
• Type: Upright vacuum with Lift-Away functionality.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Cord Length: 30 feet.
• Dust Cup Capacity: [Specify capacity, e.g., 1.5 quarts].
• Attachments: Motorized floor nozzle, wide upholstery tool, dusting brush, crevice tool, pet hair attachment.
• Cleaning Modes: Carpet, Hard Floor, Delicate.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately [Specify weight, e.g., 15 lbs].

Controls and Settings

Main Controls: ON/OFF switch, Brushroll On/Off switch, Lift-Away release button, Dust Cup release button.

Cleaning Mode Selector: Located near floor nozzle; choose CARPET (brushroll on), HARD FLOOR (brushroll off), or DELICATE (gentle suction).

Height Adjustment (if equipped): Manual dial or lever to adjust for low, medium, or high pile carpets. Accessory Use: Attach tools to wand or hose end for above-floor cleaning. Hose and Wand: Extend for high reach; retract for storage.

Cleaning Modes & Attachments

Use appropriate mode and attachment for each surface.

1. Carpet Mode: Engages motorized brushroll for deep cleaning. Use on medium to high pile carpets.
2. Hard Floor Mode: Disengages brushroll to prevent scattering debris. Use on wood, tile, laminate.
3. Delicate Mode: Reduces suction for fragile rugs or drapes.
4. Motorized Floor Nozzle: For carpets and area rugs.
5. Wide Upholstery Tool: For sofas, chairs, and mattresses.
6. Dusting Brush: For shelves, blinds, and delicate surfaces.
7. Crevice Tool: For tight spaces, corners, and between cushions.
8. Pet Hair Attachment: For removing pet hair from furniture and stairs.

Tip: Regularly check brushroll for tangled hair or strings and clean as needed.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: Empty after each use or when full to maintain suction.
2. Clean Filters: Rinse pre-motor and HEPA filters with cold water every 1-3 months. Allow to dry completely for 24 hours before reinstalling.
3. Check Brushroll: Remove debris, hair, or strings wrapped around brushroll regularly.
4. Inspect Hose and Wand: Clear any blockages if suction decreases.
5. Store Properly: Wrap cord around cord hooks; store attachments in caddy.

WARNING! Always unplug vacuum before performing any maintenance. Do not use filters until completely dry.

Regulatory Information

This appliance complies with FCC Part 15 for Class B digital devices. It meets applicable safety standards for household use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 10 minutes if motor overheats; allow to cool.

Service: 1-800-798-7398; www.sharkclean.com