Shark Navigator Swivel Plus Vacuum Cleaner Manual

The Shark Navigator Swivel Plus is a versatile upright vacuum cleaner featuring Swivel Steering for easy maneuverability, Anti-Allergen Complete Seal Technology, Lift-Away capability for portable cleaning, a large dust cup capacity, motorized brushroll for carpets, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with Swivel Steering, Lift-Away pod, motorized floor nozzle, dust cup with filter, hose, wand, and cleaning attachments.

Feature	Description
Swivel Steering	Allows 360-degree maneuverability around furniture and obstacles
Lift-Away Mode	Detachable pod for portable cleaning of stairs, upholstery, and above-floor areas
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and automatically adjusts to floor surfaces
Large Dust Cup	Easy-empty, no-bag dust cup with generous capacity
Cleaning Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning
Height Adjustment	Multiple settings for different carpet pile heights
Cord Wrap	Integrated cord wrap for easy storage

Assembly & Setup

Unpack and inspect all components. Assemble according to instructions.

Attach handle: Insert handle into upright body until it clicks into place.
Connect hose and wand: Attach hose to the vacuum body and connect the wand to the hose.
Install floor nozzle: Ensure motorized floor nozzle is securely attached to the upright body.
Install filters: Place pre-motor and post-motor (HEPA) filters into their designated slots.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury from sharp edges.

First-Time Use

Before first use, ensure all filters are installed and dust cup is empty.

Select floor setting: Adjust height setting based on carpet or hard floor.
Power on: Press power switch; indicator light will illuminate.
Engage brushroll: For carpets, ensure brushroll is ON; for hard floors, turn brushroll OFF.
Begin cleaning: Use swivel steering to maneuver around obstacles.
Empty dust cup: When full, unplug vacuum and press release to empty dust cup.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator Swivel Plus (NV360).
Cord Length: 25 feet.
Dust Cup Capacity: 1.3 dry quarts.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source:120V AC, 60Hz.
Weight: 14.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off button. Body: Height adjustment lever, dust cup release button, hose release button.

Settings: Height adjustment (low/medium/high pile carpet, hard floor). Brushroll on/off for carpets vs. hard floors. Power on/off with indicator light.

Accessories: Attachments stored on back of vacuum; easily accessible for quick changes.

Using Attachments

For above-floor cleaning: Use Lift-Away mode or attach tools directly to hose.

Detach hose: Press hose release button on vacuum body.
Select attachment: Connect crevice tool, dusting brush, or upholstery tool to wand or hose.
Clean: Use attachments for tight spaces, furniture, blinds, and ceilings.
Reattach: Return hose to storage position after use.

Tip: Ensure vacuum is powered off when changing attachments.

Lift-Away Mode

Portable cleaning for stairs, furniture, and hard-to-reach areas.

Release pod: Press Lift-Away release button on back of vacuum.
Lift pod: Detach pod from upright body; carry by handle.
Attach hose and tool: Connect hose to pod and select desired attachment.
Clean: Power on using button on pod; clean stairs, upholstery, etc.
Return pod: Reattach pod to upright body until it clicks into place.

WARNING! Do not use Lift-Away mode to vacuum large debris or liquids. Keep pod upright during use.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: After each use or when full; wash with water if needed (air dry completely).
Clean filters: Remove and tap pre-motor filter monthly; wash post-motor HEPA filter every 3 months (air dry 24 hours).
Clear brushroll: Regularly remove hair and debris wrapped around brushroll.
Check for blockages: Inspect hose, wand, and nozzle for obstructions if suction decreases.
Store properly: Wrap cord, store attachments, and keep in dry location.

CAUTION! Always unplug vacuum before maintenance. Do not operate without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check power outlet; ensure power switch is pressed; inspect cord for damage.
Loss of suction	Full dust cup/blockage	Empty dust cup; check and clear hose, wand, and nozzle for blockages.
Brushroll not spinning	Engagement setting/obstruction	Ensure brushroll is ON; clear debris from brushroll; check for belt damage.
Vacuum overheating	Blockage/filters	Unplug and let cool; clear blockages; clean or replace filters.
Unusual noise	Foreign object in brushroll or motor	Unplug and inspect brushroll and air path for objects; remove if found.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com