Shark Navigator SWIVEL PLUS NV40 Series Vacuum Cleaner Manual

The Shark Navigator SWIVEL PLUS NV40 Series is an upright vacuum cleaner featuring Swivel Steering for easy maneuverability, Anti-Allergen Complete Seal Technology with a HEPA filter, Lift-Away functionality for portable cleaning, a large-capacity dust cup, motorized brushroll for carpets, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes 7. Using Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright body with Swivel Steering, Lift-Away pod, motorized brushroll, dust cup with HEPA filter, hose, wand, and cleaning attachments.

Feature	Description
Swivel Steering	Allows 360-degree maneuverability around furniture and obstacles
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Lift-Away Function	Detachable pod for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Large Dust Cup	Easy-to-empty, bagless container
Cleaning Modes	Settings for carpets, hard floors, and delicate rugs
Attachments	Includes crevice tool, dusting brush, upholstery tool
Power Cord	Long cord with storage hooks
Wand & Hose	Extendable for above-floor cleaning
ON/OFF Switch	Controls power to the vacuum

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach the handle: Insert the handle into the upright body until it clicks into place.
Install the wand and hose: Connect the hose to the pod and clip the wand onto the back.
Attach floor nozzle: Slide the nozzle onto the base until it locks.
Insert filters: Place the HEPA filter and pre-motor filter into their designated slots.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, perform a quick test to ensure proper assembly.

Power on: Press the ON/OFF switch on the handle.
Select floor setting: Use the dial on the floor nozzle for carpets, hard floors, or rugs.
Test Swivel Steering: Move the vacuum forward and backward, steering around objects.
Test Lift-Away: Press the release button to detach the pod for above-floor cleaning.
Empty dust cup: After initial use, check and empty the dust cup if necessary.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model Series: NV40 Series.
Type: Upright vacuum with Lift-Away.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Maneuverability: Swivel Steering for 360-degree turns.
Dust Cup Capacity: [Specify volume, e.g., 1.5 quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: [Specify weight, e.g., 15 lbs].

Controls and Parts

Main Controls: ON/OFF switch on handle, floor setting dial on nozzle, Lift-Away release button, brushroll on/off switch.

Key Parts: Handle, upright body, Lift-Away pod, motorized floor nozzle, dust cup, HEPA filter, pre-motor filter, hose, wand, attachments.

Operation: Use ON/OFF for power. Adjust floor setting for surface type. Press release to detach pod. Use brushroll switch to turn brush on/off for delicate rugs. Empty dust cup when full indicator lights up.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for stairs, furniture, and above-floor cleaning.

Ensure vacuum is plugged in and ON/OFF is off before switching modes.
For upright cleaning, ensure pod is locked onto base.
For Lift-Away, press release button, lift pod, and use hose/wand.
Select floor setting: CARPET for deep cleaning, HARD FLOOR for hard surfaces, RUG for delicate area rugs.

Tip: Use the brushroll on/off switch when cleaning delicate rugs to prevent damage.

Using Attachments

Attachments include crevice tool, dusting brush, upholstery tool.

Detach pod: Press Lift-Away release button.
Connect wand: Insert wand into hose end.
Attach tool: Click desired tool onto end of wand.
Clean: Use for tight spaces, dusting surfaces, or upholstery.
Store: Return attachments to storage clips on vacuum.

WARNING! Do not use attachments to vacuum sharp objects or liquids. Keep tools clear of hair and debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove cup, empty contents into trash.
Clean filters: Remove HEPA and pre-motor filters; tap off dust or rinse (if washable) every month.
Check brushroll: Remove debris (hair, strings) from brushroll regularly.
Inspect hose and wand: Clear clogs if suction is reduced.
Store properly: Wrap cord around hooks, store attachments on unit.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Model NV40 Series. Trademarks are property of SharkNinja Operating LLC.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure ON/OFF switch is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs; clean filters.
Brushroll not spinning	Debris/switch	Turn off and unplug; remove debris from brushroll; ensure brushroll switch is on.
Vacuum is hard to push	Floor setting/brushroll	Adjust floor setting to correct height; check for obstructions in nozzle.
Unusual noise	Obstruction	Turn off and unplug; inspect hose, wand, and nozzle for blockages or foreign objects.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; sharkclean.com