Shark Navigator Pet ZU62ANZ Vacuum Cleaner Manual

The Shark Navigator Pet ZU62ANZ is an upright vacuum cleaner designed for homes with pets, featuring Anti-Allergen Complete Seal Technology, a HEPA filter, Lift-Away capability for portable cleaning, a motorized brushroll for carpets, a pet hair attachment, and multiple cleaning modes. Powered by a 120V AC motor. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized brushroll, pet hair attachment, HEPA filter, dust cup, hose, and wand.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the handle: Insert handle into upright body until it clicks.
2. Connect the hose: Attach hose to pod and secure wand to hose.
3. Install attachments: Clip pet tool and crevice tool onto storage clips.
4. Install filter: Place HEPA filter into filter compartment.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select cleaning mode.

1. Select floor type: Use height adjustment dial for carpets or hard floors.
2. Turn on power: Press power button on handle.
3. Engage brushroll: Press brushroll button for carpet cleaning.
4. Use Lift-Away: Detach pod for stairs or above-floor cleaning.
5. Empty dust cup: Press empty button when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark Navigator Pet ZU62ANZ.
• Type: Upright vacuum with Lift-Away.
• Technology: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, self-cleaning.
• Attachments: Pet hair tool, crevice tool, dusting brush.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Handle controls: POWER button, BRUSHROLL ON/OFF button. Body controls: HEIGHT adjustment dial, LIFT-AWAY release button, DUST CUP release.

Settings: Carpet height (1-4), hard floor setting. Brushroll on/off for delicate rugs. Suction control via accessory selection.

Maintenance indicators: Filter check light (if equipped).

Attachments & Accessories

Pet Hair Attachment: For furniture and stairs. Crevice Tool: For tight spaces. Dusting Brush: For delicate surfaces. Upholstery Tool: For fabrics.

1. Attach tool to wand or hose end.
2. Select appropriate suction setting.
3. Use tool on intended surface.
4. Detach and store after use.

Tip: Clear debris from tools after each use.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for portable cleaning.

1. Upright: Use on floors with brushroll engaged.
2. Lift-Away: Press release button, lift pod, use hose and wand.
3. Above-floor: Use attachments for furniture, curtains, ceilings.
4. Hard floors: Turn brushroll off to avoid scattering debris.

WARNING! Do not use wet/damp attachments. Unplug before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean filter monthly: Rinse HEPA filter under cold water, air dry 24 hours.
3. Clear brushroll: Remove hair and threads regularly.
4. Check hose for clogs.
5. Inspect attachments for damage.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes to reset thermal protector.

Service: 1-800-798-7398; sharkclean.com