Shark Navigator NV70 Series Vacuum Cleaner Manual

The Shark Navigator NV70 Series is a lightweight, upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, swivel steering for maneuverability, a large-capacity dust cup, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized floor nozzle, swivel steering handle, dust cup with HEPA filter, crevice tool, dusting brush, and upholstery tool.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Swivel Steering	Provides full maneuverability around furniture and obstacles
Large Capacity Dust Cup	Easy-to-empty, no bags required
Attachments	Crevice tool, dusting brush, and upholstery tool included
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors or delicate rugs
Height Adjustment	Multiple settings for different carpet pile heights
Cord Length	25-foot power cord with cord wrap

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the upright body until it clicks into place.
Install the floor nozzle: Align the nozzle with the front of the vacuum and push until secure.
Attach the hose: Connect the hose to the port on the vacuum body.
Insert attachments: Store crevice tool, dusting brush, and upholstery tool on the accessory holder.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure the dust cup and filters are installed correctly.

Check filters: Remove and inspect the HEPA filter and pre-motor filter; reinstall securely.
Adjust height: Set the floor nozzle to the appropriate height for your flooring.
Select mode: Choose upright mode for floors or Lift-Away mode for above-floor cleaning.
Turn on: Press the power switch; engage brushroll for carpets or disengage for hard floors.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Ensure the area is clear of obstacles.

Specifications

Model Series: NV70 (NV701, NV702, etc.).
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Floor Nozzle: Motorized brushroll with automatic carpet/hard floor detection.
Maneuverability: Swivel steering for 360-degree movement.
Dust Cup Capacity: 1.2 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Cord: 25 feet with cord wrap.
Power Source: 120V AC, 60Hz.
Weight: Approximately 12 lbs.

Controls and Settings

Main controls located on the handle and body. Handle: Power switch, brushroll on/off button. Body: Lift-Away release button, height adjustment lever, dust cup release.

Settings: Height adjustment (low/medium/high pile carpets, hard floor), brushroll on/off for carpets vs. hard floors, power on/off. Lift-Away mode: Press release button to detach pod for portable cleaning.

Using Attachments

For above-floor cleaning, detach the Lift-Away pod and connect desired attachment.

Detach pod: Press the Lift-Away release button and lift the pod from the upright body.
Select attachment: Choose crevice tool for tight spaces, dusting brush for surfaces, or upholstery tool for furniture.
Connect: Insert attachment into the end of the hose until it clicks.
Clean: Turn on the vacuum and guide the attachment over the surface.

Tip: Use the brushroll off setting when cleaning delicate surfaces with attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Unplug before servicing.

Empty dust cup: Press release button, remove cup, and empty contents into trash.
Clean filters: Remove HEPA and pre-motor filters; tap to remove dust or rinse under water (air dry completely before reinstalling).
Clear brushroll: Turn off and unplug. Remove floor nozzle to access and remove hair/debris from brushroll.
Check hose and attachments: Remove clogs using a long object; ensure airflow is unobstructed.

WARNING! Do not operate with wet filters. Ensure all parts are completely dry before reassembly.

Storage

Store in a cool, dry place. Wrap cord around cord wraps. Store attachments on accessory holder.

CAUTION! Do not store with a full dust cup. Ensure vacuum is unplugged during storage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brushroll not spinning	Engagement setting or obstruction	Ensure brushroll is set to ON; clear debris from brushroll area.
Vacuum won't turn on	Power source or switch	Check outlet and power cord; ensure power switch is pressed.
Unusual noise	Obstruction in motor or brushroll	Turn off and unplug; inspect for and remove foreign objects.
HEPA filter dirty	Normal wear	Remove and clean filter according to maintenance instructions.

Reset: Unplug for 60 seconds, then restart if issues persist.

Service: 1-800-798-7398; sharkclean.com