Shark Navigator NV42 Vacuum Cleaner Manual

The Shark Navigator NV42 is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, swivel steering for easy maneuverability, a large dust cup capacity, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Handle with controls, Motorized floor nozzle, Hose, Wand, and Cleaning attachments (crevice tool, dusting brush, pet multi-tool).

Assembly & Setup

Unpack all parts from the box and inspect for damage.

1. Attach the Handle: Slide the handle onto the main body until it clicks into place.
2. Install the Wand: Insert the wand into the socket on the back of the vacuum.
3. Connect the Hose: Attach the hose to the port on the front of the vacuum body.
4. Attach Floor Nozzle: Connect the motorized floor nozzle to the wand until it clicks.
5. Install Filters: Ensure both the pre-motor and post-motor (HEPA) filters are correctly seated.

WARNING! Ensure the vacuum is unplugged from the electrical outlet during assembly.

First-Time Operation

Plug the power cord into a standard 120V electrical outlet.

1. Select Floor Type: Use the dial on the floor nozzle to select "CARPET" or "HARD FLOOR".
2. Turn On: Press the power button on the handle.
3. Begin Cleaning: Push the vacuum forward on the floor. The brushroll will engage automatically on carpets.
4. Use Lift-Away: Press the release button to detach the pod for stairs or furniture cleaning.
5. Adjust Suction: The suction is automatic; no manual adjustment is required.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

• Model: Shark Navigator NV42.
• Technology: Lift-Away, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam and felt pre-motor filter.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments Included: Crevice tool, dusting brush, pet multi-tool.
• Weight: 12.5 lbs (approx).
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main power switch and brushroll controls are located on the handle for easy access.

Floor Nozzle Dial: CARPET (brushroll spins for deep cleaning), HARD FLOOR (brushroll spins gently or can be turned off for bare floors).

Handle Buttons: POWER (On/Off), BRUSHROLL ON/OFF (disengages brushroll for hard floors or area rugs).

Lift-Away Release Button: Press to detach the pod from the floor nozzle for portable cleaning.

Wand Release Pedal: Step on pedal to release the wand for use with attachments.

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, blinds.

1. Detach the Pod: Press the Lift-Away release button.
2. Remove Wand: Step on the wand release pedal and pull the wand out.
3. Choose Attachment: Connect the desired tool (crevice tool, dusting brush, etc.) to the end of the wand or hose.
4. Clean: Use the handle on the pod to guide the suction.

Tip: For best suction, ensure all connections are clicked firmly into place.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Check for Blockages: Regularly inspect the hose, wand, and floor nozzle for clogs.
2. Clean Brushroll: Frequently remove hair and fibers wrapped around the brushroll. Use scissors to cut and remove debris.
3. Inspect Belts: Periodically check the brushroll belt for wear or damage (consult manual for replacement).
4. Wipe Exterior: Use a dry or damp cloth to clean the vacuum body. Do not use abrasive cleaners.

WARNING! Always unplug the vacuum before performing any maintenance or checking for blockages.

Emptying the Dust Cup

Empty the dust cup when it reaches the "MAX" fill line.

1. Turn off and unplug the vacuum.
2. Press the dust cup release button and lift the cup away from the pod.
3. Hold over a trash can and press the bottom door release latch. The door will swing open to empty contents.
4. Close the door firmly until it clicks. Reattach the dust cup to the pod.

CAUTION! Empty dust cup outdoors or in a well-ventilated area if you have allergies.

Filter Care

Clean filters every month for optimal suction and allergen containment.

Pre-Motor Foam & Felt Filters: Rinse under cold water until water runs clear. Squeeze out excess water and air dry for at least 24 hours before reinstalling. DO NOT use soap.

Post-Motor HEPA Filter: Tap gently over a trash can to remove loose dust. Do not wash. Replace every 12-18 months under normal use.

IMPORTANT: Never operate the vacuum without all filters installed and completely dry.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, Navigator, and Lift-Away are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug the vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com