Shark Navigator NV42 26 Vacuum Cleaner Manual

The Shark Navigator NV42 26 is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, a large-capacity dust cup, multiple cleaning modes, a crevice tool, and an upholstery tool. It is designed for deep cleaning with powerful suction and versatile handling. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Emptying & Cleaning the Dust Cup 8. Filter Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with Lift-Away pod, motorized brushroll, Anti-Allergen Complete Seal system, HEPA filter, large dust cup, hose, wand, crevice tool, and upholstery tool.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap 99.9% of dust and allergens
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Large Capacity Dust Cup	Easy-to-empty, no bags required
Cleaning Modes	Upright, Lift-Away, Handheld
Crevice Tool	For tight spaces and edges
Upholstery Tool	For furniture and stairs
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors
Handle Controls	Easy access to power and brushroll settings

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the handle: Insert handle into upright body until it clicks into place.
Attach the hose: Connect hose to the front of the vacuum pod.
Attach the wand: Insert wand into hose end.
Attach cleaning tools: Store crevice and upholstery tools on rear caddy.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure HEPA filter and pre-motor filter are securely in place.
Select cleaning mode: Choose upright for floors, Lift-Away for above-floor cleaning.
Adjust height setting: Use dial on vacuum head for carpet height (if applicable).
Turn on power: Press power switch on handle.
Test suction and brushroll: Ensure brushroll is spinning on carpets.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll while vacuum is on.

Specifications

Model: Shark Navigator NV42 26.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, pre-motor foam filter.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Cleaning Path Width: 10 inches.
Attachments: Crevice tool, upholstery tool, dusting brush (varies by model).
Power Source: 120V AC, 60Hz.
Weight: Approximately 14 lbs.

Controls and Settings

Power switch on handle turns vacuum on/off. Brushroll on/off switch disengages brushroll for hard floors. Height adjustment dial for carpets. Handle release button for Lift-Away mode.

Upright Mode: For floor cleaning. Lift-Away Mode: Press release button to detach pod for stairs, furniture, and above-floor cleaning. Handheld Mode: Detach hose and wand with tool for spot cleaning.

Cleaning Modes & Attachments

Use appropriate mode and tool for each cleaning task.

Upright mode: For large carpeted and hard floor areas.
Lift-Away mode: Detach pod to clean stairs, under furniture, and ceilings.
Handheld mode: Use hose with attachment for tight spots.
Crevice tool: For corners, edges, and between cushions.
Upholstery tool: For sofas, chairs, and car interiors.

Tip: Turn off brushroll when cleaning hard floors to avoid scattering debris.

Emptying & Cleaning the Dust Cup

Empty dust cup when full or after each use for optimal performance.

Turn off and unplug vacuum.
Press dust cup release button and remove cup from pod.
Hold over trash can and press bottom release latch to open door.
Shake gently to empty contents.
Close latch and reattach dust cup until it clicks.

WARNING! Do not use vacuum with full dust cup. Empty outdoors if containing fine dust.

Filter Maintenance

Clean filters regularly to maintain suction and air quality.

Pre-motor foam filter: Rinse with cold water every month. Air dry completely for 24 hours before reinstalling.
HEPA filter: Tap gently to remove dust every 3 months. Replace every 12-18 months.
Check filter compartment for debris before reinstalling filters.

CAUTION! Never operate vacuum without filters. Ensure filters are completely dry before use.

Care & Storage

Unplug before maintenance. Wipe exterior with dry cloth. Store in dry area, cord wrapped securely.

CAUTION! Do not immerse in water. Keep away from heat sources. Check brushroll for tangled hair and debris regularly.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged hose/filter	Empty dust cup; check hose, wand, and filters for blockages; clean filters.
Brushroll not spinning	Tangled debris, belt issue	Turn off and unplug; remove debris from brushroll; check belt for wear.
Vacuum won't turn on	Power cord, outlet, switch	Check power cord connection; try different outlet; ensure power switch is on.
Unusual noise	Obstruction in hose or brushroll	Turn off immediately; inspect hose, wand, and brushroll for foreign objects.
Dust leaking	Dust cup not sealed, missing filter	Ensure dust cup is properly latched; check all filters are installed.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; sharkcleaner.com