Shark Navigator NV361 Series Vacuum Cleaner Manual

The Shark Navigator NV361 Series is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll for carpets, swivel steering, and multiple attachments for above-floor cleaning. It is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, dust cup, motorized floor nozzle, wand, hose, and accessory tools (crevice tool, dusting brush, upholstery tool).

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Motorized Brushroll	Deep cleans carpets and agitates debris
Swivel Steering	Maneuvers easily around furniture and obstacles
Floor Selector Switch	Adjusts brushroll for carpets or hard floors
Large Capacity Dust Cup	Easy-empty container with no bags required
Wand Release Pedal	Quickly detaches wand for above-floor cleaning
On-Board Tools	Storage for crevice tool and dusting brush
Power Cord	25-foot cord with cord wrap

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the handle: Insert handle into top of vacuum body until it clicks into place.
Install the wand: Insert wand into hose socket until secure.
Attach floor nozzle: Connect wand to floor nozzle; ensure it locks.
Install filters: Place foam and felt filters into dust cup; insert HEPA filter in back.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; turn power switch to ON.

Select floor setting: Use floor selector switch (CARPET for carpets, HARD FLOOR for hard surfaces).
Adjust height: For carpets, set appropriate height setting on nozzle.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button to remove and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model Series: NV361.
Technology: Lift-Away with Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam and felt filters.
Power Cord: 25 feet.
Dust Cup Capacity: 1.2 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: Approximately 12.5 lbs.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch (ON/OFF), wand release pedal. Floor Nozzle: Floor selector switch (CARPET/HARD FLOOR), height adjustment dial. Body: Dust cup release button, hose release button, accessory storage clips.

Settings: Floor type selection, brushroll on/off (automatically shuts off in Lift-Away mode), height adjustment (for carpet pile).

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, etc.

Detach wand: Press wand release pedal; pull wand out.
Attach tool: Insert desired tool (crevice, dusting brush) into end of wand or hose.
Use Lift-Away mode: Detach pod for handheld cleaning.
Return tools: Store on-board when finished.

Tip: For best suction, ensure filters are clean and dust cup is empty.

Lift-Away Mode

Allows portable cleaning without moving entire vacuum.

Detach pod: Press release buttons on sides of vacuum; lift pod away from floor nozzle.
Attach hose: Hose remains connected to pod; use with wand and tools.
Clean above floor: Carry pod to clean stairs, furniture, or tight spaces.
Reattach: Place pod back onto floor nozzle until it clicks.

WARNING! Brushroll automatically stops in Lift-Away mode. Do not use on carpets in this mode.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty into trash; reinstall.
Clean brushroll: Remove floor nozzle; clear hair and debris from brushroll.
Check for blockages: Inspect hose, wand, and nozzle for obstructions.
Inspect filters: Clean or replace as needed (see Filter Care).

CAUTION! Unplug vacuum before performing any maintenance.

Filter Care

Filters require regular cleaning for maximum suction.

Foam and Felt Filters: Rinse with cold water every month; air dry completely for 24 hours before reinstalling. HEPA Filter: Tap gently to remove dust; replace every 12-18 months or as needed. Do not wash HEPA filter.

Note: Never operate vacuum without all filters properly installed.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filters or hose	Empty dust cup; clean filters; check for blockages in hose, wand, and nozzle.
Brushroll not spinning	Obstruction, belt issue, floor setting	Clear debris from brushroll; check belt for wear; ensure floor selector is on CARPET.
Vacuum won't turn on	Power cord, outlet, switch	Check power cord connection; test outlet; ensure power switch is ON.
Loud noise	Blockage, foreign object in brushroll	Turn off and unplug; inspect for obstructions in nozzle, hose, or brushroll.
Vacuum tips over easily	Incorrect height setting	Adjust height dial on floor nozzle to match carpet pile.

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com