Shark Navigator NV36 series Vacuum Cleaner Manual

The Shark Navigator NV36 series is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll for carpets and hard floors, and a large-capacity dust cup. It includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Filter Care 9. Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, handle with controls, motorized floor nozzle, dust cup with HEPA filter, and accessory set.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures microscopic particles for improved air quality
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Large Capacity Dust Cup	Easy-to-empty, no bags required
Under-Appliance Wand	Cleans under furniture and appliances
Pet Power Brush	Removes embedded pet hair from upholstery
Dusting Brush	For delicate surfaces and dusting
CreVice Tool	For tight spaces and corners
On-Board Storage	Holds tools on the vacuum for easy access

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the main body until it clicks into place.
Connect the hose: Attach the hose end to the port on the front of the vacuum.
Install the floor nozzle: Slide the nozzle onto the bottom of the vacuum until it locks.
Attach the wand: Insert the wand into the hose grip.
Plug into a standard 120V AC power outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

Power on: Press the power button on the handle.
Select surface setting: Use the brushroll switch for carpets (ON) or hard floors (OFF).
Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
Use Lift-Away mode: Press the release button to detach the pod for stairs or furniture.
Empty dust cup: Press the release button to remove and empty the cup when full.

CAUTION! Do not vacuum large, hard objects or wet spills. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

Model Series: NV36 (NV360, NV361, etc.)
Technology: Lift-Away, Anti-Allergen Complete Seal
Filtration: HEPA filter, foam filter, felt filter
Dust Cup Capacity: 1.2 dry quarts
Cord Length: 25 feet
Attachments Included: Pet Power Brush, Under-Appliance Wand, Dusting Brush, CreVice Tool
Power Source: 120V AC, 60Hz
Weight: Approximately 12 lbs
Warranty: Limited 5-year warranty (see manual for details)

Controls and Settings

Main controls located on the handle and body.

Handle: Power button, suction control slider. Body: Brushroll on/off switch, Lift-Away release button, dust cup release button.

Settings: Suction control (MAX for deep cleaning, MIN for delicate rugs). Brushroll switch (ON for carpets, OFF for hard floors). Power modes (standard, eco).

Using Attachments

For above-floor cleaning, detach the pod or use the hose and wand.

Turn off and unplug the vacuum before changing attachments.
Select the desired tool (Pet Power Brush for upholstery, Dusting Brush for shelves, etc.).
Attach the tool to the end of the wand or directly to the hose.
Plug in the vacuum, turn it on, and begin cleaning.
After use, store tools on the onboard caddy.

Tip: Use the CreVice Tool for tight spaces like between cushions and along baseboards.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Check and clean the brushroll regularly; remove wrapped hair or strings.
Inspect hose and wand for clogs; clear any blockages.
Wipe down the exterior with a dry cloth.

WARNING! Always unplug the vacuum before performing any maintenance. Do not use water on electrical parts.

Filter Care

The vacuum uses multiple filters that require regular cleaning.

HEPA Filter: Remove every month and tap gently to remove dust. Do not wash. Replace every 12-18 months.
Foam & Felt Filters: Remove and rinse with cold water every 3 months. Allow to dry completely for 24 hours before reinstalling.

CAUTION! Never operate the vacuum without all filters installed and completely dry.

Storage

Store in a cool, dry place.

Wrap the power cord around the cord hooks on the back.
Store attachments on the onboard caddy.
Stand the vacuum upright or hang using the handle if possible.

Tip: Ensure the dust cup is empty and filters are dry before long-term storage.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Navigator are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, or dirty filter	Empty dust cup; check hose/wand for clogs; clean or replace filters.
Brushroll not spinning	Obstruction or belt issue	Unplug, remove nozzle, and clear any debris; inspect belt for wear.
Vacuum turns off unexpectedly	Overheating or clog	Unplug, let cool for 60 minutes; check for and clear blockages.
Unusual noise	Foreign object in brushroll or motor area	Unplug and inspect brushroll and air path for obstructions.
Vacuum won't turn on	Power issue or faulty switch	Check outlet and power cord; ensure plug is fully inserted; contact support if switch fails.

Reset: Unplug for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; sharkclean.com