Shark Navigator NV36 26 Vacuum Cleaner Manual

The Shark Navigator NV36 26 is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll for carpets and hard floors, and a large dust cup capacity. It is designed for deep cleaning with powerful suction and versatile floor-to-ceiling cleaning capabilities. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with Lift-Away pod, Handle with controls, Motorized floor nozzle, Dust cup with HEPA filter, Crevice tool, Upholstery tool, Pet Multi-Tool.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and expels cleaner air
Motorized Brushroll	Deep cleans carpets and hard floors; on/off switch
Large Dust Cup	Easy-empty, no-touch dirt disposal
Floor Selector Switch	Adjusts suction for carpets or hard floors
Wand & Hose	Extends for ceiling and under-furniture cleaning
Headlight	Illuminates dark areas under furniture
POWER Button	Turns vacuum on/off
Brushroll On/Off	Activates/deactivates motorized brush

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks securely.
Install wand: Insert wand into hose connector on back of vacuum.
Attach floor nozzle: Connect nozzle to bottom of upright body; ensure it locks.
Install filters: Place foam and felt filters into dust cup; install HEPA filter in back.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate settings.

Select floor type: Use floor selector switch (Carpet/Hard Floor).
Turn on brushroll: Press Brushroll On/Off button for carpets; turn off for hard floors.
Adjust suction: Use floor selector for optimal cleaning power.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark Navigator NV36 26.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam and felt filters.
Dust Cup Capacity: 1.3 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery tool, Pet Multi-Tool.
Power Source: 120V AC, 60Hz.
Weight: 12.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Located on handle and body. Handle: POWER button, Brushroll On/Off. Body: Floor selector switch (Carpet/Hard Floor), Lift-Away release button, Dust cup release.

Operation: Power on, select floor type, activate brushroll as needed. Use wand release to detach hose. Lift-Away: Press release button to detach pod for portable cleaning.

Settings: Carpet mode (brushroll on, high suction); Hard Floor mode (brushroll off, adjusted suction).

Using Attachments

For above-floor cleaning: detach wand and hose; attach tools.

Detach wand: Press wand release button on back of vacuum.
Attach tool: Insert crevice tool, upholstery tool, or Pet Multi-Tool into end of wand or hose.
Clean: Use for furniture, stairs, ceilings, tight spaces.
Return: Reattach wand to vacuum after use.

Tip: Ensure vacuum is off when changing attachments.

Lift-Away Mode

Detach pod for portable cleaning of stairs, furniture, and ceilings.

Press Lift-Away release button on body.
Lift pod away from floor nozzle.
Reattach: Align pod with floor nozzle and push down until it clicks.

WARNING! Ensure pod is securely attached before upright vacuuming.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Check brushroll: Remove debris, hair, or strings regularly.
Inspect hose and wand for clogs; clear if necessary.
Wipe exterior with dry cloth; do not use liquids.

CAUTION! Unplug vacuum before maintenance. Do not immerse in water.

Filter Care

Filters require regular cleaning for maximum suction.

HEPA filter: Remove every month; tap gently to remove dust; rinse under cold water every 3 months (air dry 24 hours).
Foam and felt filters: Remove and rinse monthly; air dry completely before reinstalling.
Reinstall: Ensure all filters are dry and seated properly.

Note: Do not operate vacuum without filters.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filters	Empty dust cup; check and clean filters; clear hose/wand clogs.
Brushroll not spinning	Debris wrap/switch off	Turn off, unplug, remove debris from brushroll; ensure brushroll is on.
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; check household fuse.
Unusual noise	Obstruction in nozzle/hose	Turn off, unplug, inspect and remove obstruction.
Lift-Away pod not detaching	Release button not fully pressed	Press release button firmly; ensure pod is aligned.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com