Shark Navigator NV353 Vacuum Cleaner Manual

The Shark Navigator NV353 is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brush roll for carpets, swivel steering, and multiple cleaning modes. It includes attachments for above-floor cleaning and is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Operating Instructions 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Filter Care 9. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lift-Away pod, motorized brush roll, HEPA filter, dust cup, hose, wand, and cleaning attachments.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Motorized Brush Roll	Deep cleans carpets and agitates debris
Swivel Steering	Maneuvers easily around furniture and obstacles
Cleaning Modes	Settings for carpets, hard floors, and delicate rugs
Dust Cup	Easy-empty, bagless container
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Cord	Long cord for extended reach
Wand Release	Quick-release button for easy attachment changes

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the handle: Insert handle into top of vacuum body until it clicks into place.
Connect the hose: Attach hose to the front of the vacuum pod.
Install the wand: Insert wand into hose handle until secure.
Attach floor nozzle: Connect floor nozzle to the wand or directly to the pod in Lift-Away mode.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

Operating Instructions

Power on vacuum; select appropriate cleaning mode.

Select cleaning mode: Use brush roll switch for carpets (ON) or hard floors (OFF).
Adjust height setting: Use dial on floor nozzle for carpet pile height.
Engage Lift-Away: Press release button to detach pod for above-floor cleaning.
Use attachments: Connect desired tool to hose or wand for specific cleaning tasks.
Empty dust cup: Press release button and empty when full or after each use.

CAUTION! Keep vacuum away from water and wet surfaces. Do not vacuum large objects.

Specifications

Model: Shark Navigator NV353.
Technology: Lift-Away with Anti-Allergen Complete Seal.
Filtration: HEPA filter.
Brush Roll: Motorized, with on/off control.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brush roll on/off button, hose release.

Floor Nozzle: Height adjustment dial, brush roll access latch.

Pod: Lift-Away release button, dust cup release, filter access.

Settings: Carpet mode (brush roll ON), hard floor mode (brush roll OFF), delicate rug setting (brush roll OFF). Height adjustment: Low, medium, high for carpet pile.

Using Attachments

Attachments for above-floor cleaning: crevice tool, dusting brush, upholstery tool.

Detach wand or hose from floor nozzle.
Connect desired attachment to wand or hose end.
Use for tight spaces, furniture, shelves, or curtains.
Return to upright mode by reattaching floor nozzle.

Tip: Ensure attachments are securely clicked into place before use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Clean brush roll: Remove floor nozzle, clear hair and debris from brush roll.
Check hose for clogs: Detach and inspect if suction is reduced.
Inspect filters: Clean or replace as needed (see Filter Care).
Wipe exterior with dry cloth.

WARNING! Unplug vacuum before performing any maintenance. Do not use water on electrical parts.

Filter Care

HEPA filter and pre-motor filter require regular cleaning.

Access filters: Open filter compartment on pod.
Remove HEPA filter: Tap gently to remove dust; rinse with cold water if needed (air dry 24 hours).
Clean pre-motor filter: Rinse under cold water; air dry completely before reinstalling.
Reinstall filters: Ensure they are fully dry and properly seated.

CAUTION! Never operate vacuum without filters. Do not use wet filters.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store near heat sources or in damp areas. Keep out of reach of children.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brush roll not spinning	Obstruction or belt issue	Clear debris from brush roll; inspect belt for wear.
Vacuum won't turn on	Power cord or outlet	Check power connection; try different outlet; ensure power switch is ON.
Overheating	Clog or full filters	Unplug, let cool; clear clogs; clean or replace filters.
Lift-Away not detaching	Release button stuck	Press firmly; check for obstructions around pod.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com