Shark Navigator NV27 Series Vacuum Cleaner Manual

The Shark Navigator NV27 Series is a versatile upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, Advanced Swivel Steering, a motorized brushroll for carpets, and a crevice tool for hard-to-reach areas. It includes multiple cleaning modes, a large dust cup capacity, washable filters, and various attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away canister, Advanced Swivel Steering handle, motorized brushroll, dust cup with Anti-Allergen Complete Seal, crevice tool, dusting brush, and upholstery tool.

Feature	Description
Lift-Away Technology	Detachable canister for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Advanced Swivel Steering	Maneuvers easily around furniture and obstacles
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Large Dust Cup Capacity	Holds more debris for fewer emptyings
Washable Filters	Foam and felt filters can be rinsed and reused
Crevice Tool	For tight spaces like corners and between cushions
Dusting Brush	For delicate surfaces and dusting shelves
Upholstery Tool	For cleaning furniture, stairs, and car interiors
ON/OFF Switch	Powers the vacuum on and off

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the main body until it clicks into place.
Install the hose: Connect the hose to the port on the vacuum body.
Attach cleaning tools: Store tools on the accessory caddy or attach as needed.
Plug into a standard 120V AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure the vacuum is fully assembled and filters are installed.

Check filters: Ensure foam and felt filters are properly seated in the dust cup.
Select cleaning mode: Choose between upright carpet cleaning or Lift-Away mode for above-floor cleaning.
Adjust height setting: For carpets, set the brushroll height to match pile thickness.
Begin vacuuming: Turn ON/OFF switch to start; move vacuum slowly over surfaces.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Ensure cord is untangled.

Specifications

Model Series: NV27 (NV271, NV272, etc.).
Technology: Lift-Away, Anti-Allergen Complete Seal.
Cleaning Modes: Upright, Lift-Away portable, handheld with tools.
Dust Cup Capacity: 1.5 dry quarts.
Filters: Washable foam and felt filters.
Attachments Included:Crevice tool, dusting brush, upholstery tool.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Weight: Approximately 14 lbs.

Controls and Settings

Main controls located on the handle and body. Handle: ON/OFF switch, brushroll on/off button. Body: Lift-Away release button, height adjustment lever, dust cup release.

Settings: Height adjustment (for carpets/rugs), brushroll on/off (for hard floors), suction power (auto-adjusts). Lift-Away mode: Detach canister for portable cleaning.

Accessory use: Attach tools to hose end for specialized cleaning.

Cleaning Modes & Attachments

Upright mode: For carpets and large floor areas. Lift-Away mode: Detach canister to clean stairs, furniture, and above-floor areas.

Select mode: Press Lift-Away release to detach canister.
Choose attachment: Connect crevice tool, dusting brush, or upholstery tool to hose.
Clean: Turn on vacuum and guide tool over surface.
Return to upright: Reattach canister until it clicks.

Tip: Use brushroll on for carpets, off for hard floors to avoid scattering debris.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse foam and felt filters monthly; air dry completely before reinstalling.
Clear brushroll: Remove hair and debris from brushroll regularly.
Check hose and attachments: Remove clogs if suction reduces.
Inspect cord: Ensure cord is not damaged; store properly.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters or brushroll.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks. Attach tools to caddy.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filters	Empty dust cup; clean filters; check hose for clogs.
Brushroll not spinning	Obstruction/overheat	Clear hair and debris from brushroll; let motor cool if overheated.
Vacuum won't turn on	Power cord/outlet	Check power outlet; ensure cord is plugged in securely.
Lift-Away not detaching	Release button stuck	Press release firmly; ensure canister is aligned properly.
Unusual noise	Foreign object in brushroll/hose	Turn off and unplug; inspect brushroll and hose for obstructions.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com