Shark Navigator NV26 Vacuum Cleaner Manual

The Shark Navigator NV26 is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a motorized brushroll for carpets and hard floors, swivel steering, a large-capacity dust cup, HEPA filter, crevice tool, dusting brush, and upholstery tool. It is designed for versatile cleaning on multiple surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized brushroll, swivel steering, dust cup with HEPA filter, hose, wand, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Motorized Brushroll	Deep cleans carpets and bare floors
Swivel Steering	Maneuvers easily around furniture and obstacles
Large Capacity Dust Cup	Easy-empty, no bags required
HEPA Filter	Captures fine particles and allergens
Crevice Tool	Cleans tight spaces and along edges
Dusting Brush	Gentle cleaning for delicate surfaces
Upholstery Tool	Cleans furniture, stairs, and auto interiors
Power Switch	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks into place.
Install wand: Insert wand into hose connector on vacuum body.
Attach hose: Connect hose to wand and vacuum pod inlet.
Install filters: Place foam and felt filters into dust cup; install HEPA filter in back.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; turn on power switch.

Select floor setting: Use brushroll switch for carpets (ON) or hard floors (OFF).
Adjust height: Use height adjustment lever for different carpet pile heights.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button to remove and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet spills.

Specifications

Model: Shark Navigator NV26.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Floor Settings: Carpet, hard floor, brushroll on/off.
Filtration: HEPA filter, foam and felt pre-motor filters.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off button. Body: Height adjustment lever, dust cup release, hose release for Lift-Away.

Settings: Carpet height (adjustable), brushroll on (carpets) / off (hard floors), suction power (automatic).

Lift-Away mode: Detach pod by pressing release button; use hose and wand for above-floor cleaning. Dust cup: Empty when full; press release button to remove.

Using Attachments

For above-floor cleaning: detach wand from floor nozzle.

Turn off vacuum and unplug before changing attachments.
Select tool: Crevice tool for edges; dusting brush for shelves; upholstery tool for furniture.
Attach to wand or hose end until it clicks.
Turn on vacuum and clean targeted area.

Tip: Use upholstery tool on stairs and auto interiors for detailed cleaning.

Lift-Away Mode

Enables portable cleaning of stairs, furniture, and tight spaces.

Detach pod: Press hose release button on vacuum body.
Lift pod away: Carry pod by handle; hose remains connected.
Select attachment: Attach desired tool to wand or hose.
Clean: Turn on power; use handheld for above-floor areas.
Reattach: Place pod back onto vacuum base until it clicks.

WARNING! Ensure pod is securely attached before upright vacuuming. Do not pull hose excessively.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filters: Rinse foam and felt filters monthly; air dry completely before reinstalling.
Replace HEPA filter: Every 12 months or as needed.
Clear brushroll: Remove tangled hair and debris regularly.
Check for blockages: Inspect hose, wand, and nozzle if suction reduces.

CAUTION! Unplug vacuum before maintenance. Ensure all parts are completely dry before reassembly.

Care & Storage

Unplug and cool before storing. Wrap cord around cord hooks. Store in dry area; avoid extreme temperatures.

CAUTION! Do not store with wet filters. Keep away from children and pets.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power outlet/cord	Check outlet; ensure plug is secure; inspect cord for damage.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and nozzle for clogs.
Brushroll not spinning	Tangled debris/switch	Turn off, unplug, and clear brushroll; ensure brushroll switch is ON.
Vacuum tipping over	Height setting	Adjust height lever for carpet pile; ensure pod is attached.
Dust escaping	Filter installation	Ensure filters are clean, dry, and properly installed.

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com