Shark Navigator NV180UK Vacuum Cleaner Manual

The Shark Navigator NV180UK is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll for carpets, and a swivel steering head for easy maneuverability. It includes multiple cleaning modes (upright, Lift-Away, handheld), crevice tool, dusting brush, and upholstery tool. Powered by a 1200W motor with variable suction control. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Maintenance & Cleaning 8. Filter Care 9. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, dust cup, Lift-Away pod, motorized brushroll, swivel steering head, wand, hose, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Swivel Steering	Maneuvers easily around furniture and obstacles
Variable Suction Control	Adjusts power for different floor types
Large Capacity Dust Cup	Easy-empty, bagless design
Accessory Storage	On-board storage for crevice tool and dusting brush
Wand Release Pedal	Quickly detaches wand for extended reach
Power Switch	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert handle into top of vacuum body until it clicks into place.
Install the wand: Insert wand into hose connector until secure.
Attach hose: Connect hose to rear port on vacuum body.
Install accessories: Store crevice tool and dusting brush on onboard clips.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure HEPA filter and foam filter are properly seated in dust cup lid.
Select floor setting: Adjust brushroll dial to "CARPET" or "HARD FLOOR" as needed.
Power on: Press power switch to start suction.
Test cleaning modes: Try upright mode for floors, then detach pod for Lift-Away cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator NV180UK.
Motor Power: 1200W.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Cleaning Modes: Upright, Lift-Away, handheld.
Included Tools: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 12.5 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, suction control slider, wand release pedal.

Body: Brushroll dial (CARPET/HARD FLOOR/OFF), dust cup release button, hose release button.

Settings: Suction control (MAX/NORMAL/ECO), floor type selector, power on/off. Accessory use: Attach tools to wand or hose end for detailed cleaning.

Cleaning Modes

Three main cleaning modes for versatile use.

Upright Mode: For carpets and large floor areas. Use brushroll dial for carpet or hard floor.
Lift-Away Mode: Press release button to detach pod. Clean stairs, furniture, and above-floor areas.
Handheld Mode: Remove pod and attach hose directly for spot cleaning and tight spaces.

Tip: Use MAX suction for deep carpet cleaning, ECO for hard floors to conserve energy.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove cup, and empty into trash.
Clean brushroll: Turn vacuum over, remove cover, and clear any tangled hair or debris.
Check hose for clogs: Detach and inspect if suction is weak.
Inspect wheels and swivel head for debris.

WARNING! Always unplug vacuum before performing maintenance. Do not use sharp objects to clear blockages.

Filter Care

Filters require regular cleaning for best performance.

HEPA filter: Remove every 3 months, tap gently to remove dust, or rinse under cold water (air dry 24 hours).
Foam filter: Clean monthly with cold water, squeeze out excess, and air dry completely.
Pre-motor filter: Check every 6 months, replace if damaged.

CAUTION! Never operate vacuum without filters installed. Ensure filters are completely dry before reinserting.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources and direct sunlight.

Regulatory Information

Complies with relevant safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for blockages.
Brushroll not spinning	Tangled debris/overheat protection	Unplug, clear brushroll; wait 45 minutes if motor overheated.
Vacuum won't turn on	Power cord/outlet issue	Check power outlet; ensure cord is fully plugged in.
Unusual noise	Foreign object in brushroll/hose	Unplug, inspect brushroll and hose; remove obstruction.
Dust escaping from vacuum	Filter not installed/seal damaged	Ensure filters are correctly seated; check seals for damage.

Reset: Unplug for 45 minutes to reset thermal protection.

Service: 1-800-798-7398; sharkclean.com