Shark Navigator NV180 Series Vacuum Cleaner Manual

The Shark Navigator NV180 Series is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, and a motorized brushroll for deep carpet cleaning and versatile above-floor cleaning. It includes multiple attachments for various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with dust cup, Handle with controls, Motorized floor nozzle, Lift-Away pod, Hose and wand, Attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack all parts from the box. Ensure all components are present.

1. Attach the handle: Insert the handle into the top of the vacuum body until it clicks into place.
2. Connect the hose: Attach the hose end to the port on the front of the vacuum.
3. Insert the wand: Slide the wand into the hose cuff until secure.
4. Attach floor nozzle: Connect the motorized nozzle to the bottom of the vacuum body.
5. Store attachments: Clip the provided tools onto the wand or designated storage clips.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the power cord into a standard 120V outlet. Turn on the vacuum using the power switch on the handle.

1. Select floor setting: Use the floor selector switch on the nozzle for carpets (ON) or hard floors (OFF).
2. Adjust suction: Use the suction control slider on the handle if available.
3. Empty dust cup: Check and empty the dust cup before first use if needed.
4. Test attachments: Connect tools to the wand for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll and openings.

Specifications

• Model Series: NV180 (specific models may vary).
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
• Cord Length: Approximately 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Filters: HEPA filter, pre-motor foam filter.
• Attachments Included: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 14 lbs.
• Warranty: Limited warranty (refer to manual for details).

Controls and Settings

Handle Controls: POWER switch, SUCTION CONTROL slider (if equipped), BRUSHROLL ON/OFF switch.

Nozzle Controls: Floor selector switch (Carpet/Hard Floor).

Power: Turns the vacuum motor on and off. Suction Control: Adjusts suction power for different surfaces. Brushroll Switch: Turns the motorized brushroll on for carpets or off for hard floors and delicate rugs. Floor Selector: Physically raises/lowers brushroll for optimal cleaning.

Using Attachments

For above-floor cleaning: Detach the wand from the floor nozzle.

1. Select tool: Choose crevice tool, dusting brush, or upholstery tool.
2. Connect: Insert the tool directly into the end of the wand or hose.
3. Clean: Use the tool on stairs, furniture, blinds, ceilings, or tight spaces.
4. Return: Detach and store tools on the vacuum when finished.

Tip: Turn the brushroll OFF when using attachments on hard floors or delicate surfaces.

Lift-Away Mode

Enables portable cleaning for stairs, furniture, and cars.

1. Detach pod: Press the release button(s) on the vacuum body to lift away the pod.
2. Use hose & wand: The pod remains connected to the hose and wand.
3. Clean: Carry the lightweight pod to clean above-floor areas without moving the entire vacuum.
4. Reattach: Place the pod back onto the floor nozzle and press down until it clicks.

WARNING! Ensure the pod is securely clicked into place before resuming upright vacuuming.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button, remove cup, and empty contents into trash.
2. Clean brushroll: Turn vacuum over, remove any tangled hair or debris from the brushroll.
3. Check for clogs: Inspect hose, wand, and nozzle openings if suction is reduced.
4. Inspect filters: Clean or replace filters as described in the Filter Care section.

CAUTION! Always unplug the vacuum before performing any maintenance.

Filter Care

Filters trap dust and allergens. Maintain them regularly.

HEPA Filter: Rinse with cold water every 3 months. Allow to air dry completely for 24 hours before reinstalling.

Pre-Motor Foam Filter: Rinse with cold water every month. Air dry completely before reinstalling.

CAUTION! Never operate the vacuum without all filters installed and completely dry.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, Navigator, and Lift-Away are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com