Shark Navigator NV106 Series Vacuum Cleaner Manual

The Shark Navigator NV106 Series is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll, swivel steering, and multiple cleaning modes. It is designed for deep cleaning carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lift-Away pod, motorized brushroll, HEPA filter, dust cup, hose, wand, and various attachments.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Motorized Brushroll	Deep cleans carpets and agitates debris
Swivel Steering	Maneuvers easily around furniture and obstacles
Cleaning Modes	Carpet, Hard Floor, and Bare Floor settings
Dust Cup	Large capacity, easy-empty container
Attachments	CreVice tool, pet multi-tool, dusting brush, upholstery tool
Power Cord	25-foot length for extended reach
Wand & Hose	Extendable for above-floor cleaning

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into top of vacuum body until it clicks into place.
Connect hose: Attach hose to rear of vacuum; ensure secure connection.
Install wand: Insert wand into hose grip until it locks.
Attach floor nozzle: Connect floor nozzle to wand or directly to vacuum body.
Insert filter: Place HEPA filter into filter compartment; close cover securely.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all parts are assembled correctly.

Select cleaning mode: Use brushroll switch for carpet or hard floor.
Adjust height: Set floor selector to appropriate setting (low, medium, high pile).
Power on: Press foot pedal or power button to start vacuum.
Test attachments: Connect desired tool to wand for above-floor cleaning.
Empty dust cup: After use, press release button to empty debris.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator NV106 Series.
Technology: Lift-Away with Anti-Allergen Complete Seal.
Filtration: HEPA filter.
Brushroll: Motorized, self-cleaning.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Cleaning Modes: Carpet, Hard Floor, Bare Floor.
Attachments Included: CreVice tool, pet multi-tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: Approximately 14 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power button, brushroll on/off switch, hose release button.

Body: Floor selector (low/medium/high), dust cup release, filter access.

Settings: Brushroll on/off for carpets vs. hard floors; floor height adjustment; power suction control.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

CreVice tool: For tight spaces, corners, and edges.
Pet multi-tool: Combines bristle brush and upholstery tool for pet hair.
Dusting brush: For delicate surfaces like blinds and lampshades.
Upholstery tool: For sofas, chairs, and stairs.
Extension wand: For high reach cleaning (ceilings, tops of furniture).

Tip: Ensure attachments click securely into hose or wand before use.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet mode: Brushroll on for deep cleaning; adjust height for pile.
Hard floor mode: Brushroll off to prevent scattering debris.
Bare floor setting: Use hard floor mode with floor selector on low.
Above-floor cleaning: Detach Lift-Away pod; use hose and attachments.
Stair cleaning: Use Lift-Away mode with upholstery tool.

WARNING! Do not run vacuum over power cord or loose objects. Turn off before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use; press release button to open bottom.
Clean filter: Remove HEPA filter every month; tap gently to remove dust.
Check brushroll: Regularly remove hair and debris wrapped around brushroll.
Inspect hose and attachments: Clear any clogs with long object.
Store properly: Wrap cord around cord hooks; store in dry location.

CAUTION! Unplug vacuum before maintenance. Do not wash filter; replace if damaged.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs; clean filter.
Brushroll not spinning	Obstruction/switch	Turn off and unplug; remove debris from brushroll; ensure brushroll switch is on.
Vacuum overheating	Clog/filter	Turn off and unplug; let cool; check for clogs; clean filter.
Unusual noise	Foreign object	Turn off and unplug; inspect brushroll, hose, and nozzle for obstructions.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com