Shark Navigator NV100 Vacuum Cleaner Manual

The Shark Navigator NV100 is a lightweight, upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, a dusting brush, and a crevice tool. It is designed for deep cleaning on both carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized brushroll, wide upholstery tool, dusting brush, crevice tool, HEPA filter, cord wrap hooks.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Wide Upholstery Tool	For cleaning sofas, chairs, and stairs
Dusting Brush	For delicate surfaces like blinds and lampshades
Crevice Tool	For tight spaces like corners and between cushions
On-Board Tool Caddy	Stores attachments on the vacuum for easy access
Cord Wrap Hooks	Integrated hooks for neat cord storage
Quick-Release Wand	Easy to detach for use with attachments
Floor Selector Switch	Adjusts brushroll for carpets or hard floors

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the body until it clicks into place.
Install the wand: Insert the wand into the hose port until secure.
Attach the hose: Connect the hose to the wand and body ports.
Install filters: Place the foam and felt filters into the filter cage; insert HEPA filter into the back.
Store attachments: Place tools in the on-board caddy.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in the vacuum; ensure all parts are securely connected.

Select floor type: Use the floor selector switch (CARPET/HARD FLOOR).
Power on: Press the foot pedal to turn on the vacuum.
Adjust height: For carpets, ensure brushroll is engaged; for hard floors, raise if adjustable.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: Detach wand and attach desired tool for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model: Shark Navigator NV100.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam and felt pre-motor filters.
Attachments: Motorized brushroll, wide upholstery tool, dusting brush, crevice tool.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Weight: 12.5 lbs.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the vacuum body. Foot pedal: POWER ON/OFF. Floor selector: CARPET/HARD FLOOR switch. Brushroll ON/OFF: For hard floor cleaning (disengages brushroll).

Additional Features: Quick-Release wand button, Lift-Away release button, dust cup release latch, filter access door.

Settings: Adjust suction power via floor selector; use brushroll on for carpets, off for hard floors or delicate rugs. Use hose for above-floor cleaning with attachments.

Using Attachments

Attachments stored on-board for quick access.

Detach wand: Press quick-release button and pull wand out.
Select tool: Attach desired tool (upholstery, dusting brush, crevice) to wand end.
Clean above-floor areas: Use hose and wand to clean furniture, stairs, ceilings.
Return tools: Store tools in caddy after use.

Tip: For pet hair, use the upholstery tool; for dust, use the dusting brush.

Lift-Away Mode

Enables portable cleaning for stairs, furniture, and tight spaces.

Release pod: Press the Lift-Away button on the back of the vacuum.
Lift pod: Detach the pod from the vacuum body; hose remains connected.
Clean: Carry the pod to clean stairs, under furniture, or other above-floor areas.
Reattach: Place pod back onto the body until it clicks into place.

WARNING! Ensure hose is not twisted or stretched during Lift-Away use. Keep pod upright to prevent debris spillage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse foam and felt filters monthly; replace HEPA filter every 12-18 months.
Check brushroll: Remove hair and debris from brushroll monthly.
Inspect hose: Clear any clogs using a long object.
Store properly: Wrap cord around hooks; store in a dry place.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug; try different outlet; ensure foot pedal is engaged.
Loss of suction	Full dust cup/clogged filters	Empty dust cup; clean or replace filters; check hose for clogs.
Brushroll not spinning	Debris/switch setting	Clear hair and debris from brushroll; ensure floor selector is on CARPET.
Vacuum tipping over	Wand not attached	Ensure wand is fully inserted into hose port.
Unusual noise	Obstruction in hose or brushroll	Turn off and unplug; inspect hose, brushroll, and dust cup for blockages.

Reset: Unplug for 30 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com