Shark Navigator LIFT-AWAY ZERO-M ZU571 Series Vacuum Cleaner Manual

The Shark Navigator LIFT-AWAY ZERO-M ZU571 Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Zero-M self-cleaning brushroll that reduces hair wrap, Anti-Allergen Complete Seal with HEPA filter, multiple cleaning modes (Floor, Carpet, Lift-Away), motorized pet power brush, large dust cup capacity, swivel steering, and various attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Zero-M self-cleaning brushroll, Anti-Allergen Complete Seal system, HEPA filter, motorized pet power brush, dust cup, hose, wand, and various cleaning attachments.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Zero-M Self-Cleaning Brushroll	Reduces hair wrap for pet hair and long hair
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens with HEPA filter
Motorized Pet Power Brush	Specialized brush for removing pet hair from carpets
Swivel Steering	Maneuvers easily around furniture and obstacles
Large Dust Cup Capacity	Holds more debris for fewer emptyings
Cleaning Modes	Floor, Carpet, and Lift-Away modes
Attachments Included	Crevice tool, dusting brush, upholstery tool
POWER Button	Turns vacuum on/off
Brushroll On/Off Switch	Controls motorized brushroll for different surfaces

Assembly & Setup

Unpack all components and inspect for damage.

Assemble wand: Insert wand into hose until it clicks into place.
Attach hose: Connect hose to the main body or Lift-Away pod.
Install attachments: Store attachments on holder; attach as needed.
Install filters: Ensure HEPA filter and pre-motor filter are properly seated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

First-Time Use

Before first use, ensure all filters are installed and dust cup is empty.

Select cleaning mode: Use mode selector for Floor, Carpet, or Lift-Away.
Adjust height: For carpets, set appropriate height setting.
Turn on: Press POWER button; green light indicates operation.
Use attachments: Detach wand and attach desired tool for above-floor cleaning.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Do not use on wet surfaces. Keep vacuum away from water.

Specifications

Model: Shark Navigator LIFT-AWAY ZERO-M ZU571 Series.
Technology: Lift-Away, Zero-M brushroll, Anti-Allergen Complete Seal.
Filtration: HEPA filter, pre-motor foam filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Motorized pet power brush, crevice tool, dusting brush, upholstery tool.
Cleaning Modes: Floor, Carpet, Lift-Away.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on handle and body.

Handle Controls: POWER button, Brushroll On/Off switch, Mode selector (Floor/Carpet/Lift-Away).

Body Features: Dust cup release button, Hose release button, Cord wrap hooks, Attachment holder.

Settings: Height adjustment for carpets (multiple settings), Suction control (automatic in Carpet mode), Brushroll control (on for carpets, off for hard floors).

Cleaning Modes & Attachments

Three main cleaning modes for different surfaces.

Floor Mode: For hard floors; brushroll off to prevent scattering debris.
Carpet Mode: For carpets; brushroll on for deep cleaning.
Lift-Away Mode: Detach pod for stairs, furniture, and above-floor cleaning.

Attachments: Motorized pet power brush (for pet hair on carpets), Crevice tool (tight spaces), Dusting brush (delicate surfaces), Upholstery tool (furniture).

Tip: Use appropriate attachment for each cleaning task for best results.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Wash HEPA filter every 3 months; foam filter monthly (air dry 24 hours).
Check brushroll: Remove debris and hair from Zero-M brushroll regularly.
Inspect hose and attachments: Clear any clogs.
Check for wear: Replace brushroll or filters if damaged.

WARNING! Unplug vacuum before maintenance. Do not use without filters.

Storage & Care

Store in cool, dry place. Wrap cord around hooks. Store attachments on holder.

CAUTION! Do not store near heat sources. Keep away from children and pets.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not turning on	Power cord/outlet	Check power cord connection; try different outlet.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and attachments for clogs.
Brushroll not spinning	Debris/hair wrap	Turn off and unplug; remove debris from brushroll.
Overheating	Clogged filters/full dust cup	Clean filters; empty dust cup; let vacuum cool for 60 minutes.
Unusual noise	Foreign object in brushroll or hose	Turn off and unplug; inspect brushroll and hose for obstructions.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com