Shark Navigator Lift-Away Zero-M Speed ZU560 Vacuum Cleaner Manual

The Shark Navigator Lift-Away Zero-M Speed ZU560 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Zero-M self-cleaning brushroll to eliminate hair wrap, Speed settings for different floor types, HEPA filtration, and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Zero-M self-cleaning brushroll, Handle with controls, Dust cup with HEPA filter, Hose with wand, Cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into top of vacuum body until it clicks.
2. Connect hose: Attach hose to port on front of vacuum; ensure secure connection.
3. Install wand: Insert metal wand into hose end.
4. Attach floor nozzle: Connect floor nozzle to bottom of vacuum or wand for Lift-Away mode.
5. Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure both filters are installed and clean.
2. Empty dust cup: Press release button to remove and empty dust cup.
3. Select mode: Choose upright for floors or Lift-Away for above-floor cleaning.
4. Adjust height: For carpets, set floor nozzle to appropriate height setting.
5. Select speed: Use speed dial for carpets (High) or hard floors (Low).

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

• Model: Shark Navigator Lift-Away Zero-M Speed ZU560.
• Technology: Lift-Away, Zero-M self-cleaning brushroll.
• Filtration: HEPA filter with Anti-Allergen Complete Seal.
• Dust Cup Capacity: 1.2 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: Power button, Speed dial (High/Low), Brushroll on/off switch.

Upright Mode: For floor cleaning. Lift-Away Mode: Detach pod for stairs, furniture, ceilings. Speed Settings: High for carpets, Low for hard floors. Brushroll Control: Turn off for delicate rugs or hard floors. Cord rewind: Manual wrap-around cord hook.

Cleaning Modes

Upright Mode: Attach floor nozzle; use for carpets and large floor areas. Lift-Away Mode: Press release button to detach pod; connect hose and wand for above-floor cleaning.

1. Select mode based on cleaning need.
2. For floors: Use upright with appropriate speed setting.
3. For stairs/furniture: Use Lift-Away pod with attachments.
4. Turn brushroll off for hard floors or delicate surfaces.

Tip: Clear area of loose objects before vacuuming to prevent clogs.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When dust reaches MAX line; press release button.
2. Clean filters: Wash HEPA and pre-motor filters every 3 months (air dry 24 hours).
3. Check brushroll: Remove debris; Zero-M technology reduces hair wrap.
4. Inspect hose/wand: Remove clogs using long object.
5. Store properly: Wrap cord; store attachments in caddy.

WARNING! Unplug vacuum before maintenance. Do not use damaged parts.

Attachments Guide

Crevice Tool: For tight spaces, corners, between cushions. Dusting Brush: For delicate surfaces, shelves, lampshades. Upholstery Tool: For sofas, chairs, curtains. Use attachments in Lift-Away mode.

Storage & Handling

Store in cool, dry place. Wrap cord around hooks. Use handle to carry; avoid lifting by hose.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. UL listed for safety.

Troubleshooting

Reset: Unplug for 60 seconds; restart.

Service: 1-800-798-7398; sharkclean.com