Shark Navigator Lift-Away Zero-M Speed Vacuum Cleaner Manual

The Shark Navigator Lift-Away Zero-M Speed is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Zero-M self-cleaning brushroll technology to prevent hair wrap, Speed settings for different surfaces, HEPA filtration, and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Maintenance & Care 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Zero-M self-cleaning brushroll, Handle with controls, Hose with attachments, HEPA filter, Dust cup with release mechanism.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning of stairs, furniture, and above-floor areas
Zero-M Self-Cleaning Brushroll	Automatically removes hair wrap from the brushroll during use
Speed Settings	Multiple settings (e.g., Carpet, Hard Floor) for optimized cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Large Dust Cup	Easy-to-empty, bagless dust cup with large capacity
Swivel Steering	Maneuvers easily around furniture and obstacles
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Cord	Long cord for extended reach without unplugging
Washable Filters	Foam and felt filters can be rinsed and reused
LED Lights	On brushroll to illuminate dark areas

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach the handle: Insert handle into the main body until it clicks into place.
Install the hose: Connect hose to the designated port on the vacuum body.
Attach cleaning tools: Store tools on the onboard caddy or connect as needed.
Install filters: Place foam and felt filters into the dust cup assembly.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll during assembly.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

Select cleaning mode: Choose "Carpet" or "Hard Floor" based on surface.
Turn on vacuum: Press the power button on the handle.
Adjust height: For carpets, ensure brushroll is in contact with floor.
Use Lift-Away: Press release button to detach pod for above-floor cleaning.
Attach tools: Connect desired tool to hose for detailed cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator Lift-Away Zero-M Speed.
Technology: Zero-M self-cleaning brushroll, Lift-Away design.
Filtration: HEPA filter with foam and felt pre-filters.
Dust Cup Capacity: [Specify capacity, e.g., 1.5 quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: [Specify weight, e.g., 15 lbs].
Warranty: Limited [e.g., 5-year] warranty.

Controls and Settings

Handle Controls: Power button, Speed selector (Carpet/Hard Floor), Lift-Away release button. Main Body: Dust cup release, Brushroll on/off switch (for hard floors).

Speed Settings: Carpet mode (higher suction), Hard Floor mode (lower suction with brushroll off option). Lift-Away: Detach pod for handheld cleaning; hose connects to pod. Brushroll Control: Turn brushroll on/off for delicate rugs or hard floors.

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod to clean stairs, furniture, and tight spaces.

Select appropriate speed setting for surface.
For above-floor cleaning, detach pod and attach desired tool.
Use hose and tools for crevices, upholstery, and dusting.

Tip: Use Hard Floor mode with brushroll off for delicate surfaces to prevent scattering debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

Check brushroll: Regularly remove any debris or hair wrap (Zero-M reduces but may need occasional manual cleaning).
Inspect hose and attachments: Clear any clogs.
Wipe exterior: Use a dry cloth to clean vacuum body.
Store properly: Wind cord around cord hooks; store in a dry place.

WARNING! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Emptying the Dust Cup

Empty dust cup when full or after each use for best suction.

Turn off and unplug vacuum.
Press dust cup release button to remove cup.
Hold over trash can; press bottom release to open lid and empty contents.
Close lid securely and reattach dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in a well-ventilated area to minimize dust exposure.

Filter Care

Washable filters should be cleaned every 1-3 months depending on use.

Remove filters: Take out foam and felt filters from dust cup assembly.
Rinse: Use cold water only; do not use soap or detergents.
Dry: Allow filters to air dry completely for at least 24 hours before reinstalling.
Reinstall: Place dry filters back into assembly; ensure they are seated properly.

Note: Do not operate vacuum without filters installed. Replace HEPA filter as recommended (typically every 12-18 months).

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © SharkNinja Operating LLC. All rights reserved. Shark, Navigator, Lift-Away, and Zero-M are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, or dirty filters	Empty dust cup; check hose and attachments for clogs; clean or replace filters.
Brushroll not spinning	Clog or obstruction	Turn off and unplug; remove debris from brushroll area; ensure brushroll is installed correctly.
Vacuum won't turn on	Power cord or outlet issue	Check power cord connection; try a different outlet; ensure power button is engaged.
Hair wrap on brushroll	Zero-M may need assistance	Turn off and unplug; use scissors to cut and remove any wrapped hair.
Unusual noise	Foreign object in brushroll or motor area	Turn off immediately; inspect brushroll and hose for obstructions; remove any objects.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com