Shark Navigator Lift-Away ZD201 Series Vacuum Cleaner Manual

The Shark Navigator Lift-Away ZD201 Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal technology with HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, a dusting brush, and a crevice tool. It includes a 25-foot power cord, swivel steering, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Handle with controls, Motorized floor nozzle, Hose, Wand, and Cleaning tools.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable cleaning above floors
Anti-Allergen Complete SealHEPA filter captures 99.9% of dust and allergens
Motorized BrushrollDeep cleans carpets and agitates debris
Swivel SteeringManeuvers easily around furniture and obstacles
Wide Upholstery ToolCleans couches, stairs, and auto interiors
Dusting BrushFor delicate surfaces like blinds and lampshades
Crevice ToolReaches tight spaces like corners and between cushions
25-Foot Power CordExtended reach for large rooms
Large Dust CupReduces frequency of emptying
On-Board Tool StorageKeeps attachments handy on the vacuum

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

  1. Attach the handle: Align handle with the main body and push down until it clicks into place.
  2. Connect the hose: Insert hose end into the port on the front of the vacuum until secure.
  3. Attach the wand: Insert wand into the hose grip until it clicks.
  4. Install floor nozzle: Align nozzle with the bottom of the vacuum and push until it locks.
  5. Install filters: Place foam and felt filters into the dust cup; install HEPA filter in the back.
  6. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed and attachments are secure.

  1. Power on: Press the power button on the handle.
  2. Select surface setting: Use the brushroll switch for carpets (ON) or hard floors (OFF).
  3. Begin vacuuming: Push vacuum forward and back slowly for best results.
  4. Use Lift-Away mode: Press the release button to detach the pod for above-floor cleaning.
  5. Empty dust cup: Press the dust cup release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Controls and Settings

Main controls located on the handle and body. Handle: Power button, Brushroll ON/OFF switch. Body: Lift-Away release button, Dust cup release button, Hose release lever.

Settings: Brushroll ON for carpets (agitates debris); Brushroll OFF for hard floors (suction only). Lift-Away mode detaches pod for stairs, furniture, and above-floor cleaning. Suction control is automatic based on floor type.

Using Attachments

Attachments stored on-board for easy access.

  1. Detach hose: Press hose release lever and pull hose out.
  2. Connect wand: Insert wand into hose grip.
  3. Choose tool: Attach desired tool (upholstery, brush, crevice) to end of wand.
  4. For motorized floor nozzle: Use in upright mode; automatically engages on carpets.

Tip: Ensure connections are clicked securely to maintain suction.

Cleaning Modes

Two primary modes: Upright and Lift-Away.

  1. Upright Mode: For floors. Use brushroll ON for carpets, OFF for hard floors.
  2. Lift-Away Mode: Press release button to detach pod. Carry to clean stairs, furniture, ceilings, and other above-floor areas.
  3. Combination: Use upright for floors, then detach for detailed cleaning without switching vacuums.

WARNING! Do not use the vacuum to pick up sharp objects, which may damage the dust cup or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button; empty when cup is full or after each use.
  2. Clean filters: Rinse foam and felt filters monthly; replace HEPA filter every 12-18 months.
  3. Clear brushroll: Remove debris wrapped around brushroll regularly.
  4. Check for clogs: Inspect hose, wand, and nozzle if suction decreases.
  5. Wipe exterior: Use a dry cloth to clean the vacuum body.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinstalling.

Storage

Store in a cool, dry place. Wrap cord around cord hooks. Store attachments on-board.

CAUTION! Do not store near heat sources or in damp areas.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup, clog, or dirty filtersEmpty dust cup; check for clogs in hose, wand, nozzle; clean or replace filters.
Brushroll not spinningDebris wrapped around brushroll, switch OFFClear debris from brushroll; ensure brushroll switch is ON for carpets.
Vacuum won't turn onNot plugged in, tripped outletCheck power cord connection; try a different outlet; check household circuit breaker.
Lift-Away pod not detachingRelease button not fully pressedPress release button firmly while lifting pod away from body.
Unusual noiseObject stuck in hose or brushrollTurn off and unplug; inspect hose, wand, and brushroll for obstructions.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com

Shark Navigator Lift-Away ZD201 Series Vacuum Cleaner Manual © - All Rights Reserved 2025