Shark Navigator Lift-Away Vacuum Cleaner Manual

The Shark Navigator Lift-Away is a versatile upright vacuum cleaner featuring Lift-Away technology for portable deep cleaning, Anti-Allergen Complete Seal Technology, a swivel steering head for easy maneuverability, multiple floor settings (carpet, hard floor, area rugs), a large-capacity dust cup with washable filters, a motorized brushroll, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, swivel steering handle, dust cup with filter system, motorized brushroll, hose, wand, and cleaning attachments.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap dust and allergens
Swivel Steering	Maneuvers easily around furniture and obstacles
Floor Selector	Adjusts suction for carpets, hard floors, and area rugs
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Large Dust Cup	Easy-to-empty, no bags required
Washable Filters	Foam and felt filters can be rinsed and reused
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Power Cord	Long cord with cord wrap for storage
ON/OFF Switch	Controls power to the vacuum

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

Attach the handle: Insert the handle into the top of the vacuum body until it clicks into place.
Install the hose and wand: Connect the hose to the port on the vacuum body, then attach the wand to the hose.
Attach cleaning tools: Store attachments on the onboard caddy or connect directly to the wand as needed.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed and the dust cup is empty.

Select floor setting: Turn the dial on the handle to match your floor type (carpet, hard floor, area rug).
Power on: Press the ON/OFF switch on the handle.
Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
Use Lift-Away mode: Press the release button to detach the pod for stairs, furniture, or above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark Navigator Lift-Away (NV series).
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: Washable foam and felt filter, HEPA filter.
Dust Cup Capacity: [Specify volume, e.g., 1.5 quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: [Specify weight, e.g., 14 lbs].

Controls and Settings

Main controls located on the handle and body.

Handle: ON/OFF switch, floor selector dial, hose release button.

Body: Dust cup release button, brushroll on/off switch (if applicable), power cord wrap.

Floor Settings: CARPET (for deep cleaning), HARD FLOOR (reduces suction to prevent scattering debris), AREA RUG (medium setting). Brushroll Control: Turn on for carpets, off for hard floors or delicate rugs. Suction Power: Adjustable via floor selector; full power in Lift-Away mode.

Using Attachments

For above-floor cleaning, detach the Lift-Away pod and connect desired tools.

Detach pod: Press the release button on the handle and lift away the pod.
Connect tool: Attach crevice tool, dusting brush, or upholstery tool to the end of the wand or hose.
Clean: Use the tool on stairs, furniture, blinds, or tight spaces.
Reattach: Return the pod to the main body until it clicks into place.

Tip: Ensure the hose is fully extended and not twisted for optimal suction.

Maintenance & Cleaning

Regular maintenance ensures peak performance and longevity.

Empty dust cup: Press release button, remove cup, and empty contents into trash.
Clean filters: Remove foam and felt filters; rinse under cold water and air dry for 24 hours before reinstalling.
Clear brushroll: Turn off and unplug vacuum. Remove brushroll cover and clear any hair or debris wrapped around the brushroll.
Check hose and wand: Remove blockages by disconnecting and inspecting for obstructions.

WARNING! Always unplug vacuum before maintenance. Do not operate without filters installed.

Storage & Care

Store in a cool, dry place. Wrap power cord around cord wraps. Secure hose and attachments.

CAUTION! Do not store near heat sources or in damp areas. Keep out of reach of children.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; clean filters; check hose and wand for blockages.
Brushroll not spinning	Debris wrapped around brushroll, belt broken	Clear brushroll of debris; inspect and replace belt if necessary.
Vacuum won't turn on	Power cord not plugged in, ON/OFF switch faulty	Ensure plug is secure in outlet; check switch function.
Lift-Away pod not detaching	Release button stuck, pod not aligned	Press release firmly; realign pod with main body.
Unusual noise	Foreign object in brushroll or hose	Turn off and unplug; inspect brushroll, hose, and wand for obstructions.

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com