Shark Navigator Lift Away UV730 Vacuum Cleaner Manual

The Shark Navigator Lift Away UV730 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal Technology with HEPA filter, Powered Lift-Away mode for above-floor cleaning, LED headlights, large-capacity dust cup, motorized brushroll for carpets, and multiple attachments for various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum body with Lift-Away pod, motorized floor nozzle, wand, hose, and accessory attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into upright body until it clicks.
2. Connect hose: Attach hose to pod and secure to wand holder.
3. Install floor nozzle: Align nozzle with upright body and push until locked.
4. Attach accessories: Click crevice tool and upholstery tool into dock.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; follow operational steps.

1. Select mode: Use upright mode for floors; press Lift-Away button for above-floor cleaning.
2. Adjust settings: Turn brushroll ON for carpets, OFF for hard floors.
3. Empty dust cup: Press release button to remove and empty dust cup.
4. Check filters: Ensure HEPA and pre-motor filters are installed.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing from brushroll.

Specifications

• Model: Shark Navigator Lift Away UV730.
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA.
• Power: Corded electric, 120V AC, 60Hz.
• Dust Cup Capacity: 1.5 dry quarts.
• Attachments: Crevice tool, upholstery tool, pet multi-tool (varies by model).
• Brushroll: Motorized, auto-adjusts to carpet height.
• Cord Length: 25 feet.
• Warranty: 5-year limited warranty (see manual for details).

Controls and Settings

Main controls located on vacuum body. Upright Handle: Power switch, suction control slider. Pod: Lift-Away release button, brushroll on/off switch.

Indicator Lights: LED headlights on floor nozzle; filter check light (if equipped).

Settings: Suction control (High/Low), brushroll on/off for carpets vs. hard floors, Lift-Away mode for stairs/upholstery. Maintenance indicators: Filter check reminder light.

Using Attachments

For above-floor cleaning: Use Lift-Away mode with attachments.

1. Detach pod: Press Lift-Away release button.
2. Select tool: Crevice tool for tight spaces; upholstery tool for furniture; dusting brush for surfaces.
3. Connect tool: Insert into hose end or wand.
4. Clean: Turn on power; move tool over surface.

Tip: Use lower suction setting for delicate fabrics. Empty dust cup when full.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; hold over trash; empty contents.
2. Clean filters: Remove HEPA and pre-motor filters; tap gently or rinse (see instructions).
3. Check brushroll: Remove debris (hair, strings) from brushroll; ensure free rotation.
4. Inspect hose/wand: Clear clogs with long object if suction reduces.
5. Wipe surfaces: Use dry cloth to clean vacuum exterior.

WARNING! Unplug vacuum before maintenance. Allow filters to dry completely before reinserting.

Storage & Care

Store in cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep vacuum upright to prevent damage.

Regulatory Information

This appliance complies with FCC Part 15. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com