Shark Navigator Lift-Away UV725BXBRN Vacuum Cleaner Manual

The Shark Navigator Lift-Away UV725BXBRN is a versatile upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets, a powered lift-away pod for above-floor cleaning, multiple attachments (crevice tool, dusting brush, pet multi-tool), swivel steering, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Handle with controls, Motorized floor nozzle, Hose with wand, Dust cup with HEPA filter, Attachments (crevice tool, dusting brush, pet multi-tool).

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates debris
Swivel Steering	Maneuvers easily around furniture and obstacles
Large Capacity Dust Cup	Easy-to-empty, bagless dust cup
Powered Lift-Away Pod	Maintains suction when detached for stairs and upholstery
Attachments	Crevice tool, dusting brush, and pet multi-tool included
ON/OFF Switch	Powers the vacuum cleaner
Brushroll On/Off	Disengages brushroll for hard floors
Floor Selector	Adjusts settings for carpets or hard floors

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks into place.
Connect the hose and wand: Insert the wand into the hose port on the vacuum body.
Attach floor nozzle: Connect the motorized floor nozzle to the bottom of the vacuum body.
Install filters: Ensure the HEPA filter and pre-motor filter are correctly seated in their compartments.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in the vacuum and familiarize yourself with the controls.

Select floor setting: Use the floor selector switch for carpets (brushroll on) or hard floors (brushroll off).
Power on: Press the ON/OFF switch on the handle.
Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press the release button to remove and empty the dust cup when full.
Use attachments: Detach the wand or hose to connect tools for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll and openings.

Specifications

Model: Shark Navigator Lift-Away UV725BXBRN.
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, pet multi-tool.
Floor Nozzle: Motorized brushroll with on/off control.
Filtration: HEPA filter, foam and felt pre-motor filters.
Warranty: 5-year limited warranty (see manual for details).

Controls and Settings

Main controls located on the handle and body. Handle: ON/OFF switch, Brushroll On/Off button. Body: Floor selector switch, Lift-Away release button, Dust cup release button.

Settings: Carpet mode (brushroll on), Hard floor mode (brushroll off), Lift-Away mode (detach pod for portable cleaning).

Filtration: HEPA filter (replace every 12 months), Pre-motor filters (clean monthly). Maintenance: Empty dust cup after each use, check for brushroll obstructions regularly.

Using Attachments

Attachments connect to the wand or hose for above-floor cleaning.

Detach the wand from the floor nozzle or Lift-Away pod.
Select an attachment: Crevice tool for tight spaces, dusting brush for surfaces, pet multi-tool for pet hair.
Connect the attachment to the end of the wand or hose.
Turn on the vacuum and begin cleaning.

Tip: For best suction, ensure attachments are firmly clicked into place.

Lift-Away Mode

Detach the pod for portable cleaning of stairs, upholstery, and other above-floor areas.

Press the Lift-Away release button on the back of the vacuum.
Lift the pod away from the floor nozzle and main body.
Use the hose and wand with attachments for cleaning.
The pod remains powered, providing full suction.
To reattach, align the pod with the main body and push until it clicks.

WARNING! Ensure the vacuum is turned off before detaching or reattaching the pod.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: Press release button, remove and empty into trash. Clean with dry cloth.
Clean filters: Remove pre-motor foam and felt filters monthly; rinse with water and air dry completely before reinstalling.
Replace HEPA filter: Replace every 12 months or as needed.
Check brushroll: Regularly remove hair and debris wrapped around the brushroll. Turn off and unplug before cleaning.
Inspect hose and attachments: Clear any clogs and wipe clean.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not use the vacuum without all filters properly installed and dry.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. Shark and Navigator are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398. Keep these instructions for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose and nozzle of blockages.
Brushroll not spinning	Obstruction, belt issue, mode setting	Turn off and unplug; remove debris from brushroll; ensure brushroll is set to ON for carpets.
Vacuum won't turn on	Power source, ON/OFF switch	Check power outlet and cord connection; ensure ON/OFF switch is pressed.
Unusual noise	Obstruction in hose or nozzle	Turn off and unplug; inspect hose, wand, and nozzle for foreign objects.
Lift-Away pod not detaching	Release button not fully engaged	Press the Lift-Away release button firmly and lift the pod straight up.

Reset: Unplug the vacuum for 10 minutes if it overheats; check and clear any blockages.

Service: 1-800-798-7398; sharkclean.com