Shark Navigator Lift-Away Pro NV358QPR Series Vacuum Cleaner Manual

The Shark Navigator Lift-Away Pro NV358QPR Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes (upright, lift-away, handheld), swivel steering, a large-capacity dust cup, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Cleaning Attachments 7. Cleaning Different Surfaces 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, swivel steering handle, dust cup with HEPA filter, hose, wand, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and hard floors; on/off control
Swivel Steering	Maneuvers easily around furniture and obstacles
Large Dust Cup	Easy-empty, no bags required
Cleaning Modes	Upright, Lift-Away, Handheld
Accessories	Crevice tool, dusting brush, upholstery tool included
POWER Button	Turns vacuum on/off
Brushroll Switch	Activates/deactivates motorized brushroll
Lift-Away Release	Detaches pod from floor nozzle

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into top of vacuum body until it clicks.
Connect hose and wand: Insert wand into hose port; attach hose to vacuum body.
Install floor nozzle: Align nozzle with vacuum body and push until it locks.
Attach tools: Store crevice tool, dusting brush, and upholstery tool on dock.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before cleaning, perform initial setup.

Check filters: Ensure HEPA filter and pre-motor filter are installed correctly.
Select mode: Choose upright for floors or press Lift-Away release for above-floor cleaning.
Adjust height: For carpets, set floor nozzle to appropriate height setting.
Power on: Press POWER button; select brushroll on/off as needed.
Empty dust cup after first use to ensure optimal suction.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model Series: NV358QPR.
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Cleaning Modes: Upright, Lift-Away, Handheld.
Brushroll: Motorized, on/off control for carpets/hard floors.
Dust Cup Capacity: XX liters (dry).
Attachments: Crevice tool, dusting brush, upholstery tool.
Cord Length: XX feet.
Power Source: 120V AC, 60Hz.
Weight: XX lbs.

Controls and Modes

Main controls located on handle and body.

Handle: POWER button, Brushroll on/off switch, Lift-Away release button.

Modes: Upright (for floors), Lift-Away (detach pod for stairs, furniture), Handheld (remove pod and use with hose and tools). Height adjustment: Dial on floor nozzle for different carpet piles. Suction control: Automatic based on floor type when brushroll is on.

Cleaning Attachments

Use attachments for detailed cleaning.

Crevice tool: For tight spaces, corners, between cushions.
Dusting brush: For delicate surfaces, shelves, blinds.
Upholstery tool: For sofas, chairs, curtains.
To attach: Remove wand from hose; click tool into end of hose or wand.

Tip: Ensure vacuum is powered off when changing attachments.

Cleaning Different Surfaces

Adjust settings based on surface type.

Carpets: Use upright mode with brushroll ON; adjust height dial for pile.
Hard floors: Use upright mode with brushroll OFF or ON for debris.
Above floors: Use Lift-Away mode; attach tools for furniture, stairs, ceilings.
Stairs: Detach pod; use hose and tools for steps and risers.
Upholstery: Use upholstery tool in Lift-Away or handheld mode.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Avoid vacuuming cords.

Maintenance & Care

Regular maintenance ensures performance and longevity.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse HEPA filter and pre-motor filter every 3 months; air dry 24 hours.
Clear brushroll: Remove debris and hair from brushroll monthly.
Check blockages: Inspect hose, wand, and nozzle for clogs if suction reduces.
Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged filters or parts.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug; try different outlet; ensure POWER is pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check filters; clear hose/nozzle blockages.
Brushroll not spinning	Debris/switch	Clear hair/debris from brushroll; ensure brushroll switch is ON.
Vacuum tipping over	Height setting	Adjust height dial for carpet; ensure floor nozzle is locked.
Unusual noise	Obstruction	Turn off; check for blockages in hose, wand, or nozzle.

Reset: Unplug for 1 minute; restart.

Service: 1-800-798-7398; sharkclean.com