Shark Navigator Lift-Away Pro NV356K N Vacuum Cleaner Manual

The Shark Navigator Lift-Away Pro NV356K N is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets and hard floors, a large dust cup capacity, multiple cleaning modes, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, dust cup with HEPA filter, wand, hose, and accessory attachments (crevice tool, dusting brush, pet multi-tool).

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into upright body until it clicks.
2. Connect hose: Attach hose to wand and pod connections.
3. Install floor nozzle: Slide nozzle onto wand base until secure.
4. Insert filters: Place foam and felt filters into dust cup; install HEPA filter in back.
5. Store attachments: Place tools in on-board caddy.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into standard 120V outlet; select cleaning mode.

1. Check filters: Ensure all filters are properly installed.
2. Select mode: Choose upright for floors, Lift-Away for stairs/furniture.
3. Adjust height: For carpets, set floor nozzle to appropriate height.
4. Turn on: Press power switch; use suction control as needed.
5. Empty dust cup: Press release button to empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: NV356K N Navigator Lift-Away Pro.
• Technology: Lift-Away, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam and felt pre-filters.
• Dust Cup Capacity: 1.3 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, pet multi-tool.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls on vacuum body. Power Switch: On/Off. Brushroll Switch: Turns brushroll on for carpets, off for hard floors. Suction Control: Adjusts suction power (MAX for deep clean). Wand Release: Button to detach wand. Lift-Away Release: Button to detach pod.

Indicators: Dust cup full indicator; filter check light.

Settings: Upright mode (floors), Lift-Away mode (stairs/upholstery), handheld mode (with attachments).

Using Attachments

For above-floor cleaning: detach wand or use Lift-Away pod.

1. Detach wand: Press wand release button.
2. Connect tool: Insert crevice tool, dusting brush, or pet tool into wand or hose end.
3. Use Lift-Away: Press release button to detach pod; connect hose and tool.
4. Clean: Turn on power; move tool over surface.

Tip: Use dusting brush for delicate surfaces; crevice tool for tight spaces.

Cleaning Modes

Three main modes for different cleaning needs.

1. Upright Mode: For carpets and hard floors. Engage brushroll for carpets; turn off for hard floors.
2. Lift-Away Mode: Detach pod for stairs, upholstery, under furniture. Use with hose and tools.
3. Handheld Mode: Use hose with attachments for spot cleaning, ceilings, cars.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash.
2. Clean filters: Rinse foam and felt filters monthly; air dry 24 hours.
3. Replace HEPA filter: Every 12 months or as needed.
4. Clear brushroll: Remove debris from brushroll regularly.
5. Check hose/wand: Remove clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Care & Storage

Store in cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheated.

Service: 1-800-798-7398; sharkclean.com