Shark Navigator Lift-Away Pro NV356E Vacuum Cleaner Manual

The Shark Navigator Lift-Away Pro NV356E is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes, a large-capacity dust cup, crevice tool, pet multi-tool, and upholstery tool. It is designed for deep cleaning on various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, wand, dust cup with HEPA filter, hose, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and hard floors; automatically adjusts
Cleaning Modes	Upright, Lift-Away, Handheld
Large Capacity Dust Cup	Easy-empty, no bags required
Accessory Storage	Crevice tool, pet multi-tool, upholstery tool store on board
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors or delicate rugs
Wand Release	Button to detach wand for above-floor cleaning
Lift-Away Release	Button to detach pod from floor nozzle

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach wand: Insert wand into vacuum body until it clicks.
Attach hose: Connect hose to wand and pod ports.
Attach floor nozzle: Slide nozzle onto wand base until secure.
Install filters: Ensure pre-motor and HEPA filters are correctly seated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; select cleaning mode.

Select mode: Use upright for floors; press Lift-Away release for stairs/furniture.
Adjust height: For carpets, set floor nozzle to appropriate height setting.
Turn on: Press power switch; green light indicates operation.
Use attachments: Detach wand or pod to use crevice tool, pet tool, etc.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing from brushroll.

Specifications

Model: NV356E Navigator Lift-Away Pro.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Cleaning Modes: Upright, Lift-Away, Handheld.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, pet multi-tool, upholstery tool.
Power Source: 120V AC, 60Hz.
Filtration: Washable pre-motor filter and HEPA filter.

Controls and Settings

Main controls located on vacuum body. Power Switch: On/Off. Brushroll Switch: Engages/disengages brushroll. Wand Release: Detaches wand. Lift-Away Release: Detaches pod from floor nozzle.

Settings: Floor height adjustment (for carpets), suction control (on handle). Indicator Lights: Green for power; red for brushroll jam or full dust cup.

Cleaning Modes & Attachments

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod to clean stairs, furniture, under tables. Handheld Mode: Use with hose and tools for spot cleaning.

Select attachment based on surface: Crevice tool for tight spaces; pet tool for hair; upholstery tool for furniture.
Attach tool to end of hose or wand.
Turn on vacuum and clean.

Tip: Turn off vacuum before changing attachments or modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse pre-motor and HEPA filters every 3 months (air dry 24 hrs).
Clear brushroll: Remove debris wrapped around brushroll; check for damage.
Inspect hose and attachments: Remove clogs; wipe with dry cloth.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters or brushroll.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris/jam	Turn off, unplug, and clear brushroll; ensure brushroll switch is on.
Overheating	Clog/filter	Check for clogs; clean filters; let vacuum cool 30-60 minutes.
Unusual noise	Foreign object	Turn off, unplug, and inspect hose, brushroll, and dust cup for objects.

Reset: Unplug for 30 minutes; check filters and clear clogs.

Service: 1-800-798-7398; sharkclean.com