Shark Navigator Lift-Away Pro NV355 N Vacuum Cleaner Manual

The Shark Navigator Lift-Away Pro NV355 N is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes (upright, lift-away, handheld), a large dust cup capacity, swivel steering for maneuverability, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, wand, hose, dust cup with HEPA filter, and accessory tools.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into upright body until it clicks.
2. Connect hose: Attach hose to wand and pod connections.
3. Install floor nozzle: Slide nozzle onto upright body until locked.
4. Insert filter: Ensure HEPA filter is properly seated in dust cup lid.
5. Attach tools: Store accessories on onboard caddy.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into standard 120V outlet; select cleaning mode.

1. Check filter: Ensure HEPA filter is installed correctly.
2. Select mode: Use upright for floors; press Lift-Away release for above-floor cleaning.
3. Adjust brushroll: Turn brushroll ON for carpets, OFF for hard floors or delicate rugs.
4. Empty dust cup: Press release button to remove and empty when full.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: NV355 N Navigator Lift-Away Pro.
• Technology: Anti-Allergen Complete Seal with HEPA filter.
• Cleaning Modes: Upright, Lift-Away, Handheld.
• Dust Cup Capacity: [Specify volume, e.g., 1.5 quarts].
• Cord Length: [Specify length, e.g., 25 feet].
• Power Source: 120V AC, 60Hz.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: [Specify weight, e.g., 15 lbs].

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, Lift-Away release button.

Settings: Brushroll control (on for carpets, off for hard floors), suction power (single speed), height adjustment (automatic or manual depending on model). Maintenance indicators: Check filter light (if equipped). Accessory storage: Onboard caddy for tools.

Cleaning Modes

Three modes for versatile cleaning.

1. Upright Mode: For floor cleaning. Attach floor nozzle; use handle to push vacuum.
2. Lift-Away Mode: For above-floor cleaning. Press release button, lift pod away, use hose and wand with tools.
3. Handheld Mode: For quick cleanups. Detach hose from wand, attach tool directly.

Tip: Use brushroll ON for carpets to agitate dirt; OFF for hard floors to avoid scattering debris.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty contents into trash.
2. Clean filters: Rinse HEPA filter and pre-motor filter (if equipped) with cold water every month; air dry 24 hours.
3. Clear brushroll: Remove debris from brushroll regularly; cut tangled fibers if necessary.
4. Check blockages: Inspect hose, wand, and nozzle for clogs.
5. Inspect belt: Replace if worn or damaged (if applicable).

WARNING! Unplug vacuum before maintenance. Do not use filters until completely dry.

Accessories & Attachments

Tools enhance cleaning for specific tasks.

Store tools on onboard caddy for easy access.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com