Shark Navigator Lift-Away Pet UV500WM Vacuum Cleaner Manual

The Shark Navigator Lift-Away Pet UV500WM is a versatile upright vacuum cleaner designed for pet owners, featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal Technology with HEPA filter, Powered Brushroll for deep carpet cleaning, Pet Power Brush attachment, UV500WM sanitizing light technology, multiple cleaning modes (Carpet, Hard Floor, Bare Floor), and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, Powered Brushroll, Pet Power Brush attachment, UV sanitizing light wand, HEPA filter, dust cup, hose, and wand.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach the handle: Insert handle into top of vacuum body until it clicks into place.
2. Connect the hose: Attach hose to front of vacuum; ensure secure connection.
3. Install the wand: Insert wand into hose end; twist to lock.
4. Attach floor nozzle: Connect floor nozzle to wand; press release pedal to secure.
5. Install HEPA filter: Place filter into compartment at back of dust cup.
6. Charge UV light (if required): Plug charging cable into UV wand port for initial charge.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug power cord into outlet; select appropriate cleaning mode.

1. Select floor setting: Use dial on floor nozzle for Carpet, Hard Floor, or Bare Floor.
2. Power on: Press foot pedal or power button on handle.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Use Lift-Away mode: Press release button to detach pod for stairs or furniture.
5. Activate UV light: Press UV button on wand when cleaning surfaces; light will illuminate.
6. Empty dust cup: Press release button when full; hold over trash bin.

CAUTION! Keep UV light away from eyes and skin. Do not use on wet surfaces.

Specifications

• Model: Shark Navigator Lift-Away Pet UV500WM.
• Technology: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Powered, self-cleaning.
• Attachments: Pet Power Brush, crevice tool, dusting brush, upholstery tool.
• UV Light: UV500WM sanitizing technology.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and floor nozzle.

Handle: Power button, UV light button, hose release. Floor Nozzle: Mode dial (Carpet/Hard Floor/Bare Floor), brushroll on/off switch. Lift-Away Button: Detaches pod from floor nozzle. Dust Cup Release: Button at top of dust cup.

Settings: Carpet mode (brushroll active), Hard Floor (brushroll reduced), Bare Floor (brushroll off). UV Light: Press to activate; auto-shutoff after 10 minutes. Suction Control: Adjustable via mode dial.

Cleaning Modes & Attachments

Use appropriate mode and attachment for each surface.

1. Carpet Mode: For medium to high-pile carpets; brushroll agitates deeply.
2. Hard Floor Mode: For wood, tile, laminate; reduces brushroll speed.
3. Bare Floor Mode: For delicate surfaces; brushroll disengages.
4. Pet Power Brush: Attach to hose for pet hair on furniture and stairs.
5. Crevice Tool: For tight spaces like corners and between cushions.
6. Dusting Brush: For shelves, blinds, and electronics.
7. Upholstery Tool: For sofas, curtains, and car interiors.

Tip: Clear area of large debris before vacuuming to prevent clogs.

Using UV Sanitizing Light

The UV500WM light helps reduce bacteria and allergens on surfaces.

1. Ensure surface is dry and free of large debris.
2. Attach UV wand to hose or use in handheld mode.
3. Press UV button on handle; blue light indicates activation.
4. Slowly move light over surface; maintain contact for 3-5 seconds per area.
5. Light auto-shuts off after 10 minutes; press again to reactivate.
6. Recharge wand if light dims; use provided USB cable.

WARNING! Do not look directly at UV light. Keep away from children and pets. Not for use on skin or living tissue.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use; wash with water monthly (air dry completely).
2. Clean HEPA filter every 3 months; tap gently or rinse (air dry 24 hours).
3. Clear brushroll of hair and debris weekly; use scissors to cut wrapped fibers.
4. Check hose for clogs; use long object to dislodge blockages.
5. Inspect UV light lens; wipe with dry cloth if dirty.
6. Store in cool, dry place; wrap cord around hooks.

CAUTION! Unplug before maintenance. Do not use wet filters or dust cup.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV500WM technology patented. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product contains a HEPA filter that may contain trace amounts of fiberglass; handle with care and dispose of properly.

Troubleshooting

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com